4wd
- Thread starter Vikingfynbo
- Start date
Lever will not move up into 4WD but moves down into 2WD feels like it is blocked or jammed. I tried moving back and forth while pulling on lever too.
Viking… you are asking folks that are blind to look at your malfunctioning tractor.
You have to consider that when you ask for help.
For example,…. have you looked beneath the tractor and inspected the Linkage to that lever?
is there a stick jammed in it? Is it properly connected and routed? …or is it Bent out of shape?
The First thing us blind folks Imagine …. is the front drive-line is out-of-sync with the rear drive-line…. and is why our suggestions only consider that.’
I.E. : You need to do the simple inspection and take/share pics if you want useful help.
You have to consider that when you ask for help.
For example,…. have you looked beneath the tractor and inspected the Linkage to that lever?
is there a stick jammed in it? Is it properly connected and routed? …or is it Bent out of shape?
The First thing us blind folks Imagine …. is the front drive-line is out-of-sync with the rear drive-line…. and is why our suggestions only consider that.’
I.E. : You need to do the simple inspection and take/share pics if you want useful help.
does what this guy did ring a bell?
www.tractorbynet.com
otherwise, like stated above, need more info to even make an educated guess.
is the machine new to you or had it for years, new symptom or started recently or after an event, hours on the machine, etc.??
our b8200 pto and 4wd levers rotate on the same trunnion shaft and they have interfered with each other occasionally.
good luck!
BX2370-1 4WD Won't Stay Engaged
Took delivery yesterday, finally! When I put the lever to 4WD, it won't stay and will pop out back into 2WD. I really think it's an adjustment that needs to be made since it will stay in gear until a load is put on the front wheels. I only have 5.8 hours on the tractor and it had .4 when I...
www.tractorbynet.com
otherwise, like stated above, need more info to even make an educated guess.
is the machine new to you or had it for years, new symptom or started recently or after an event, hours on the machine, etc.??
our b8200 pto and 4wd levers rotate on the same trunnion shaft and they have interfered with each other occasionally.
good luck!