3rd Function kit
- Thread starter DONLI
- Start date
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Is this what you are asking about?
Chief Third Function Kit
This third function kit adds universal functionality to a front or rear mounted skid-steer and utilizes existing power on your tractor's valving. Shop now!
www.baileyhydraulics.com
If so its just a valve and joystick contril handle. Not a horrible price for the basic pieces but far from a complete kit. You will spend another $300 to fit it to your L3301. Do you have the knowledge and skills to do that?
This is less money, far more complete, and probably close to fitting a L3301 right out of the box
Third Function Valve Kit For Kubota L4600 & amp L4701 Series Tractors | eBay
Fitment: Third Function Valve Kit For Kubota L4600 & L4701 Series Tractors Kubota L4600: LA 764 Loader Kubota L4701: LA 765 Loader Description： Solid aluminum housing designed for rugged use Max Operating Pressure: P = 5080 PSI, T = 3050 PSI, A & B = 5080 PSI Flow Rating: 15 GPM Aluminum Body...
www.ebay.com
Dan
Last edited:
Yes that is the one.Is this what you are asking about?
Chief Third Function Kit
This third function kit adds universal functionality to a front or rear mounted skid-steer and utilizes existing power on your tractor's valving. Shop now!
If so its just a valve and joystick contril handle. Not a horrible price for the basic pieces but far from a complete kit. You will spend another $300 to fit it to your L3301. Do you have the knowledge and skills to do that?
This is less money, far more complete, and probably close to fitting a L3301 right out of the box
Third Function Valve Kit For Kubota L4600 & amp L4701 Series Tractors | eBay
Fitment: Third Function Valve Kit For Kubota L4600 & L4701 Series Tractors Kubota L4600: LA 764 Loader Kubota L4701: LA 765 Loader Description： Solid aluminum housing designed for rugged use Max Operating Pressure: P = 5080 PSI, T = 3050 PSI, A & B = 5080 PSI Flow Rating: 15 GPM Aluminum Body...www.ebay.com
Dan
Fast fingers and slow brain is my only defence!!
And yes I have done it before.
I figure about $250 for hoses, there is a shop here that makes them to order.
Thant you!
Don
Old Machinist
Well-known member
Equipment
Kubota LX3310 cab, JD4120, JD4410, JD F725, Swisher 60", etc.
That is a lot of parts for the money.This is less money, far more complete, and probably close to fitting a L3301 right out of the box
Third Function Valve Kit For Kubota L4600 & amp L4701 Series Tractors | eBay
Fitment: Third Function Valve Kit For Kubota L4600 & L4701 Series Tractors Kubota L4600: LA 764 Loader Kubota L4701: LA 765 Loader Description： Solid aluminum housing designed for rugged use Max Operating Pressure: P = 5080 PSI, T = 3050 PSI, A & B = 5080 PSI Flow Rating: 15 GPM Aluminum Body...www.ebay.com
Dan
I used a Chief valve in my DIY install on my LX and had just over $500 in the whole thing. I spent hours and hours configuring everything I wanted. I bought the valve from Bailey and the side port manifold from Summit. I bought most of the hoses and fittings from Discount Hydraulic Hose. BTW they offered a small TTWT discount.
I tucked the valve inside the loader frame.
I routed it all to the left side of my loader to make it less cluttered.
Last edited:
Thank you Dan.Is this what you are asking about?
Chief Third Function Kit
This third function kit adds universal functionality to a front or rear mounted skid-steer and utilizes existing power on your tractor's valving. Shop now!
If so its just a valve and joystick contril handle. Not a horrible price for the basic pieces but far from a complete kit. You will spend another $300 to fit it to your L3301. Do you have the knowledge and skills to do that?
This is less money, far more complete, and probably close to fitting a L3301 right out of the box
Third Function Valve Kit For Kubota L4600 & amp L4701 Series Tractors | eBay
Fitment: Third Function Valve Kit For Kubota L4600 & L4701 Series Tractors Kubota L4600: LA 764 Loader Kubota L4701: LA 765 Loader Description： Solid aluminum housing designed for rugged use Max Operating Pressure: P = 5080 PSI, T = 3050 PSI, A & B = 5080 PSI Flow Rating: 15 GPM Aluminum Body...www.ebay.com
Dan
Do you know if it will fit a L3301 with a LA525 loader?
Don
I dont see anything but a valve, subplate, wiring harness, and couplers. Its tractor agnostic. You will have to make or buy all of the tractor specific brackets, hoses, and fittings.
The kit I linked is complete and mde to fit a L4701 so it should be a readonsble fit on a L3301.
I know which one I would buy and the decision is not even close.
Dan
Last edited:
Dan I was referring to this kit from EBAY, do you know if it will fit a L3301 with a LA525 loader?
Thanks !
Don