i7win7
Well-known member
Equipment
BX2370, B2650 grapple, tree puller, trailer mover, 3 point hoist, mower, tiller
Jensen radioWhat do you have the antenna mounted for? We are often trying to figure a way to communicate. Thanks
ThanksJensen radio
Jensen Mini Waterproof AM/FM/NOAA Stereo
Jensen Mini Waterproof AM/FM/NOAA Stereo - Jensen and Voyager - JHD910 - Stereoswww.campingworld.com
If you do not mind a head set you could use your cell phones and a "Blue Parrot"head set. It will cancel out the background noise from the tractor and still let you talk.Jensen radio
Jensen Mini Waterproof AM/FM/NOAA Stereo
Jensen Mini Waterproof AM/FM/NOAA Stereo - Jensen and Voyager - JHD910 - Stereoswww.campingworld.com
Miss them bad!!!!
I used a pwm unit. It is the dial 0-10.If you wire in a potentiometer you can control the current and make the fan a variable speed unit.
Moving Pictures is my favorite album ever.Woah!
If you turned all those on I might think I'm at a RUSH concert!!![]()
I was going for the lowest cost and easiest to install. The PWM is probably the better solution but a cheap POT is all I would need. I do like your idea though.I used a pwm unit. It is the dial 0-10.
I don't know what it would cost to buy one, but I think that the lower ROPS from a BX2360 or a BX2350 would fit your model.Need taller building - have to fold ROPS - otherwise I too would have a canopy mount.
I was going for the lowest cost and easiest to install. The PWM is probably the better solution but a cheap POT is all I would need. I do like your idea though.
The PWM that you linked to is made in China. I try to stay away from Chinese made electronics. Their reputation in electronics is worse than Japanese electronics were in the early 1960's.
I figured it would be better for the fan life. It IS needed, the fan wide open blows a 14mph breeze.
Good luck with thatThe PWM that you linked to is made in China. I try to stay away from Chinese made electronics. Their reputation in electronics is worse than Japanese electronics were in the early 1960's.
I have had good luck with that. Before I buy anything at all, including electronics, I check the country of manufacture. I sometimes end up paying more for an item but to me it is worth the additional cost to get good quality in the things I buy.Good luck with that![]()