Search results

Anyone known the specs for charging and a/c system on an L4200? I'm replacing the compressor.

DEFINITELY!!!

I HAVEN'T FOUND THE BREAK YET BUT I HAVE POWER FROM THAT FUSE THROUGH A WHITE WIRE WITH A BLUE STRIP TILL IT GOES IN A PASS THROUGH UNDER THE CONSOLE THAT GOES UNDER THE TRACTOR. THE WIRE LOOM COMES OVER TO THE DRIVER SIDE (NO POWER) AT THIS POINT. GOES BACK INTO THE CAB UP THE PILLAR OVER TO...

Well this changes my whole thought process on how i thought it worked. I will update after diag.

I will try that. I did send power to the blower on what I believe is the direct wire to the blower bypassing the resistor wires and I turned the cold function on and everything worked on that function, Compressor clutches kicked in and blower came on and was blowing nice cool air. The other 2...

OPENING UP THE HARNESS IS WHAT I WILL TRY NEXT TO FOLLOW THESE WIRES AND SEE WHAT I CAN FIND. :(

I would love a schematic right about know. I do believe my switches are good I tested them removed them checked the copper plate inside that makes the connections. all is well with it power went though switch it each with when switched on. I've sent power threw a blue and black wire and...

I thought so too. but when I bench tested it with battery power all switches work as they should.

I have Kubota l4200 gst-c with the a/c shorting out. I've replaced the relay. I've unplugged the blower motors, resistor, and thermostat. i have power in to switch but once i turn the switch to any on position I lose my 12v. I've looked all over the internet for a wiring diagram for this model...