Search results

  1. F

    Am I picky or is this within "spec"? STB1072 plow

    This is from the manual I got with the plow.
  2. F

    Am I picky or is this within "spec"? STB1072 plow

    Pink bar is again on the SsQa mount. You can also see the right side of the SSQA mount is tweaked counterclockwise a bit. Which would also add to the issue. The measurement between the two SSQA plates is almost a 1/4" different top to bottom.
  3. F

    Am I picky or is this within "spec"? STB1072 plow

    I moved the bolts from the locked position to the trip position. So those bolts migrate back and forth. They are currently doing nothing and just "stored" there.
  4. F

    Am I picky or is this within "spec"? STB1072 plow

    There is very little up and down play if the plow is mounted to the tractor and in the air. I also looked for washers or something they installed incorrectly from one side to the other to make up the difference but there doesn't appear to be anything like that. The SSQA plate is welded to the A...
  5. F

    Am I picky or is this within "spec"? STB1072 plow

    It is a Land pride STB1072
  6. F

    Am I picky or is this within "spec"? STB1072 plow

    Took the plow off the tractor so thats no longer a variable. In the picture the pink bar is a straight piece of unistrut sitting on the QA mount. You can see the difference/ angle vs the top of the plow blade.
  7. F

    Am I picky or is this within "spec"? STB1072 plow

    I'm pretty confident in the fact it is the plate / plow, always was, as for me, it is very easy to see in person. Pictures are difficult though and I understand that. I should not have posted the picture I did, didn't realize it was going to be such a difficult issue to express. I understand...
  8. F

    Am I picky or is this within "spec"? STB1072 plow

    Easy to say I am not impressed with this product so far. All my other Land Pride stuff is still in great shape after 3 years with very little rust anywhere. I did notice the rust but didn't pay attention to if it was even powder coated or not. I'll have to look today.
  9. F

    Am I picky or is this within "spec"? STB1072 plow

    I said in my post the tape was just pointing at where I measured. I'm not gonna try and measure and take pictures In all those spots. Gist is that the a-frame that attaches to the qa bracket we'll say is what was welded crooked. I have had the tractor in many different locations.
  10. F

    Am I picky or is this within "spec"? STB1072 plow

    Ok, So I got back out after dinner and did some measuring etc. For anyone who said my tractor wasn't level good job, the first level picture, the more level one, is the top of the QA of the blade attached to the tractor, so not perfectly level, I award all of you 1 attaboy. The second level...
  11. F

    Am I picky or is this within "spec"? STB1072 plow

    I have 3 other front end attachments and none of them have this issue, so I'm pretty confident its not the tractor. I noticed the issue in my yard first. Then went to the driveway, blacktop, same issue. Then went to the garage floor. Same issue, same side low. So at least its consistent. Ha.
  12. F

    Am I picky or is this within "spec"? STB1072 plow

    Took a look at 20 and 21. I can't see if those are installed without taking the nut off but the blade doesn't have any wiggle, besides the normal movement of the loader arms anyways. I did just measure from that bolt to the bottom of the bracket it goes though and both sides are very close, if...
  13. F

    Am I picky or is this within "spec"? STB1072 plow

    This is very helpful. I'm pretty certain it is not the tractor. I also don't know how the qa on the tractor and the qa on the blade both line up with the tops of my loader arms perfectly and the blade is the only crooked thing, but it would be the tractor. I realize it is hard to see everything...
  14. F

    Am I picky or is this within "spec"? STB1072 plow

    The qa plate and the plow are welded together. Even if I aired up one side so the plow hits flat across the ground the qa plate and the plow will still be crooked to each other.
  15. F

    Am I picky or is this within "spec"? STB1072 plow

    That is also what I see. Thanks for the comment.
  16. F

    Am I picky or is this within "spec"? STB1072 plow

    I have been called very picky, many times in my life. So knowing you see what I see makes me feel better.
  17. F

    Am I picky or is this within "spec"? STB1072 plow

    Never noticed anything crooked on my bucket or grapple. And when I say I never noticed it, I look all the time after using the grapple and make sure I didn't tweak anything. Tires are GTG. Checked them. I still think the tires have nothing to do with the qa plate and the plow it is welded too...
  18. F

    Am I picky or is this within "spec"? STB1072 plow

    Looking at the difference in how the qa plate planes out with the blade, not how it lines up with the garage door. This pic may help to explain. See the pink tape sticking above the plow on the right while the left is "flush". The pink tape is on the qa mount corners.
  19. F

    Am I picky or is this within "spec"? STB1072 plow

    Added some pink tape to the top of the qa plate. Maybe can see it better now. The qa plate sits straight to my loader arms. The plow is what seems to be crooked.
  20. F

    Am I picky or is this within "spec"? STB1072 plow

    The garage door doesn't really matter its just a white background. The top of the qa plate on both sides should line up on both sides of the plow shouldn't it? Edit: re-read your post. Yes the plow is higher on the left side.