Search results

  1. F

    Front Axel

    L3130 Just changed front axel oil switched to 80-90 gear oil drained a little from both sides when changing motor oil for a look see {Struck gold} changed front axel oil at 1000hr serv. used udt 2 did not strike gold at that service time . Don't know what oil was in it then as I just got it. Had...
  2. F

    Before it happens

    Have not had a instance where they come unlatched but figured I’d addressed the issue before it happens
  3. F

    Ballast added

    Old air compressor tank 20 gallons just added it to the land plain 166 lbs plus tank
  4. F

    Chip pile

    Got 6 dumptruck loads of chips from line crew plies are steaming turn over or let sit ??
  5. F

    Fabricating a ripper for 3 point (need measurements)

    As the heading stater / need the measurement from were the lift arms hook up to were the top link hooks up / think it should be the same as any 3 point implement (but just incase) THANKS ( L3130 )
  6. F

    Trie

    Looking for a good used 18.4 x 28
  7. F

    HST Trans

    Hi All Swapped out the HST on my l3130 with a used one / the original worked butt had a great loss of power / have it on the eng. stand/ started disassemble both plates are destroyed picture of the rotary motor plate & swash plate - plate one completely gone/ things are a little chewed up/ but...
  8. F

    HST Swap out

    Easier the thought / still a big job / transmission jack a must /
  9. F

    H S T Problum

    Im back / First want to thank all for your input / My H S T Tramsmisson Is bad / New one $11,900 + bucks / Quote from dealer to rebuild depending on parts needed $10,000 to $14,000 / Bln searching web for a trans "ZIP" / Had my self convinced was not going to be albe to salvage this tractor/...
  10. F

    Back to HST problum

    L3130 HST loss of power when traveling slightest hill eng. bogs down /bin through the fuel system "3'times /tank out cleaned out "All new hoses"/installed inline electric fuel pump/ new injectors /psi test system/ new governor spring/ ( NOW I NOTICED ) After putting it all back together "AND...
  11. F

    Yennal parts

    Any body with any first hand knolage of there parts / Can get new injector bump $465 with shipping & no core /best rebuilt i can find $599 plus core / D1503 eng.
  12. F

    Loss of power

    L3130 HST Have had a ongoing power loss problum when traviling bogs down going up the slightest grade med,& gear/ have bin through the intire fuel system every thing off /tank out & cleaned /filter assembly dismantled & cleaned All hoses blown out/ Just installed new remaned injectors / new...
  13. F

    injector torque

    l3130 replacing injectors two questions / how to remove heat shields / torque on injectors / dowen loaded manual all im finding in is inj. cap screw & cap nut torques Thanks
  14. F

    Cost trans rebuild

    L3130 hst think it is a trans. problum / going to do one more test going to hook it up a grain grinder put a load on the pto / if eng. bogs dowe under this load its a eng. problum / if not its the hyd trans./ just wondering if any has had hst trasn. rebuilt on similar tractor & the cost Thanks
  15. F

    L3130 HST drastic loss of power

    L3130 HST drastic loss of power will bairly deag land plain on flat ground in mid gear / engine boggs dowm / drained & changed fuel / new filter / blew out line to tank / will not go up any graid in high gear with bogging down / RPM 's drop when this happens HELP THANKS
  16. F

    Need input

    L3130 HST When going down the road in High Mid gear will not get out of its own way bogs down to almost stall on slightest grade / Did a 1,000 hr service IS WORSE / Had a small drip from fuel pump just changed NO DIFFERENCE ? Help /Eng. bogs down & RPM drop
  17. F

    Fuel pump

    L3130 fuel laeking from the fuel pump / not a lot gust enough to make area wet / cleaned every with paper towles / is for sure leaking from pump / not hose conects/ got bump comming / Question tractor bogs down when trveling down the road almost will not move in high gear / just srarted / FUEL...
  18. F

    Raptor filters

    OK Anybody use these ??
  19. F

    Front axel fluid

    OK servising my L3130 front axel U D T oil or gear oil / My thinkig U D T is kinda light in Viscisity ??
  20. F

    Pictures Finally

    Have some down time after neck disk surgery to down load pictures to the laptop just some of items built for tractor /Cultivator had for a while / Chainsaw mount just slips in 1/4" plate UHMW plastic to hold saw / Land plain before completion added two 4"x4" angles for cutting edges/ 1/4" plate...