Search results

Thanks!

Thanks!

Thanks!

I need to change the hydraulic fluid in my KX91-2 excavator.What is the most efficient way to get as much as possible out of the system? Thanks

Thanks I hope that's all it is

No.It has 850 hours on it.Any way to be sure it's the pump? Thanks

I recently purchased a B8200.I changed all the fluids when I got it,along with cleaning or replacing filters.Yesterday when I raised the 3 point hitch it responded slowly and jerked coming up.Fluid level is fine.I took the lift arms off and the top link in case something was binding but no...

What is the most efficient way to remove a B8200 fuel tank? Thanks

Sorry for the misunderstanding.I ordered the parts from Messicks you posted the numbers for.When I get them I'll get my friend that's a machinist to do the repair.Thanks again

Thanks so much for the assist.I already ordered the parts from Messick's.Exactly why I joined this group.Thanks again

I need the disc and the triangular shapes drive.thanks

Will send a picture tomorrow.Thanks

I have a 60 inch deck for my B8200. The 2 piece pulley assembly that attaches to the front pto shaft is worn completely out. The holes in the disc are out of round and the bearings are worn down to the pins.Anybody have a replacement set,know where I can get one,or know of any alternatives? Thanks

I purchased a 2 wheel drive B8200 for a winter project. It came with a deck in usable condition that is in pieces because the previous owner was going to "restore" the tractor.There is a 2 piece drive consisting of a disc about 7 inches and 1 inch thick with 3 holes in it.The other piece is a...

will do Thanks

I recently purchased a KX 91-2 excavator.The last few times I used it the cab drifts to the left when it's idling. I try to do as much of my own work as possible but I'm not sure if this is something I can do.Anybody have any information they can share,I would appreciate it.Thanks