Search results

Well it turned out to be a replacement of the wire harness and the ECU. And my pocket book is$3,700 lighter. I did do it all my self though and had a great dealership that tested a known good ecu on my trailered tractor before I put down the big money for the ECU. Hopefully kubota will figure...

Relay checked out and I realized I had my cpu not connected. Might need to try again tomorrow when my head is a little clearer.

In getting fuel moving through the pump. Spilled everywhere when I turned key on a the tank was off and recirc. Line was open... On another note this test failed. Now I need to find out why. Any ideas? Wire harness?

Test light illuminates on both.

Thanks for the reply. I did check resistance to battery neg on the connector and got no resistance

Update. Took the tractor into a dealer that plugged in and ECU that was good But still had the P605 Error. He pulled out his multimedia and did a few checks said I wasn't getting power to the ECU and suggested if I'm finding it myself to just replace the harness. I brought it back home and...

Going through your great step by step here, but in step 3 it says plug ecu connector back in. Does this men plugging into the engine ecu? Do you check the 4 and 6 pin on the back of the connector? Or is the engine ecu not suppose to be connected and you just check these at the connector?

Just got it back from taking the tractor to the dealer. They put in "known good" ECU and still read the code. He did some quick checks on the pin-outs, more than discussed in the WSM, and said one of them was not getting power. I opted to leave it on the trailer and take it back home and work...

We're you ever able to start the tractor with the P0605 code?

What did they find?

Oh I did replace battery as that was the first problem. No longer getting this wonky lights on the dash

The noise is the leaf blower. Tried jumping but with screw driver between battery terminal and starter engager thing (wrong name). No luck Now p0605 error and is cranking but won't start. Reading some p0605 threads and sounds like I may be in deep trouble. Thx for reply

Correction..I had starter sol. Cable disconnected. Now it just turns but no start

Dang I think I've just experienced the same thing. Dead battery. Replaced and P0605 error that won't stay cleared and I can't start the tractor. Tried to jump it as well so maybe that could be a culprit. Very information read. What other options do I have besides unplugging can connectors

Came out to start the tractor and dash boars lights started flashing weird and won't start. Hydrostatic. Batter shows green indicator(good). Lots of voltage. Battery leads tested for connection ground no resistance. See if I can post a video here to show my issue. Any help would be...

Anyone know where to get a cheep WSM for mx5200. Electrical issues last night and I have no idea where to start.

Thanks Dave for the instructions. I made the adjustments per the manual and doesn't hit the relieve valve. I'm pretty sure that was the issue. Earplugs in and 2400 rpms and I wasn't noticing that 1 out of 3 times I lifted the back boxblade to max and kept working the tractor that it was...

Made myself a REAL nice blow nozzle and blew them out.

I will try this tonight on my 3pt at full extend. Where would this adjustment be? Having a hard time finding a PDF online I can download.

Rear remotes + 3rd function kit installed by dealer. No backhoe, No implements attached. Bucket works fine until things heat up. Thanks for the response.