Search results

Dang I didn’t even think about that. Just checked thou and both the springs are there. Cam does not appear to be bent or damaged. I’m not really sure how to measure without having it out ? Any ideas on that? Curious on the pump shims that set timing. So I understand you reuse your shims...

Tamperproof!! Looks like a bullseye. Like a moth to the flame lol. now that the dust has settled. I can say I would do the same thing over again. pulling things apart that are beyond my skill level is one of my favorite things to do. I have most def paid for some lessons and this is one. But...

Ya pretty bitter sweet for sure. At least I know motor will run before I spend the money. Pulled the damaged port apart. And layed it out how I put it together. Figured something would be damaged but don’t see anything that would have cause it. I guess it just froze and something had to...

Well!!!! Got another spring on it. Got the rack moving as it should. Gravity fed a 5 gallon can of diesel to filter and direct to ip. Fires right up in a about 5-6 revs Purring like a kitten Then pop. Starts stuttering. Shut it down and open fuel arm door. And behind door...

yea the small spring I circled seems pretty weak if im looking at it right. I’m trying to avoid pulling injectors

i agree i think im having a fuel flow issue. Bc i reckon it should be pumping smoke out exhaust if cranking it and the fuel is not combusting. Are you talking about the delivery valves in the top section of the Injection pump? Paint marks ? I will have a look at the control rack again. Inspect...

Hey motion. I really appreciate the detailed reply 1 its been down for over a year i popped lines off the top of injection pump and was getting no fuel squirt out of top of ip and had good fuel flow to the outlet side of fuel pump everything i found online said don't take ip apart so i...

Ok so I have a Lincoln vantage welder with a v1505 I believe e2-bg. It’s 1800rpm. I was not getting fuel coming out of injector pump so i pulled the tank and inspected then inspected rubber lines. Replaced all inline filters. Replaced fuel pump. Still no fueL out of ip.Found pumps online for...