Search results

We don’t have rocks in the fields in West Tennessee. Most farmers here pull a seedbed prep tool like this behind a disk or field cultivator. I wanted a 3 pt version to pull behind my M5660 after disking to level and prep the soil before seeding with a Land Pride seeder.

That looks great. I’ve got 21 “S” tines from the Brillion cultivator that I intend to put on a frame like that.

Update on my 3 pt Unverferth rolling basket harrow project. I started with a 4 row Brillion cultivator, removed the cultivator gangs and 3 pt brackets and cut the tool bar in half then remounted the 3pt brackets and added the rolling basket sections. Still need to fab and mount the 2 stands...

Thanks for your inquiry. The main pieces are 1.5 x 0.25 flats. The gussets (seen welded on in the photos in my original post) are 0.75 x 0.1875 flats. I made the bends using a Handy Bend brake in a 30 ton H press, so the bends are curved instead of sharp. See the photo below for the dimensions...

We don’t have rocks here in Northwest Tennessee, but I did spend several minutes breaking up a large limestone rock that got caught in a basket I was pulling last week. Sometimes there will be limestone rocks in the ag lime and the spreader truck will throw them out in the field. My son is the...

I’ve thought about that but I need to be able to lift the implement up. The sections have a toothed harrow bar in front of the baskets that will make it hard to roll backwards. I’ve got a cut- down JD 7000 planter toolbar on wheels that I might try to mount the sections on.

I have (2) 48” Unverferth rolling basket harrow sections (see picture that I borrowed off of the internet) that we had to remove from the ends of a much wider implement. I’d like to put them on a 3 point hitch tool bar to pull behind my M5660. Has anyone built something like this? Thanks Bill

I’ve just now seen your post. Thanks for showing your solution to the inaccessible bolt.

I bought a pair of Victor 250 series Medalist Made in USA regulators for $45. Both look like they have seen little use. The oxygen regulator is model 250-80-540. The fuel gas regulator is model 250-40-510LP marked “LIQ. PETRO. GAS ONLY”. I intend to use these with a Victor 100C handle and CA1350...

Thank you fellows. This discussion has been informative. You all have answered my question.

M5660 operation manual page 50 says don’t operate boom and bucket cylinders simultaneously. LA1154 loader operation manual page 9 indicates simultaneous operation is standard procedure. What is the correct procedure?

Who manufactures the canopies that the dealers install on Kubotas?

Anyone have any experience running a Maschio Giraffa M 160SE on an M5660SUHD?

Tractor and tires are sold. Everything is sold.

Tractor price reduced

Thanks. That’s what I thought too. Tractor and 5 pieces of equipment for $9500. Most people don’t know what a B7100 with 4WD and hydrostat will do.

Additional pictures of equipment. EVERYTHING IS SOLD. Tiller and finish mower stored inside on roll around carts. Rake, grader blade and box blade stored outside on blocks. Rake tines are straight. Rake will come with a set of removed rear gauge wheels. Top cutting edges of blades never used. I...

SOLD. 4WD. Hydrostat. This is a workhorse from the newer model range. Very well maintained. Will provide manuals, records, and receipts. Stored inside since I bought it May ‘96. 6 bolt front hubs. Clamp type rear hubs. Mods to hold top link, keep hydrostat pedal in line, and add front...

These parts are no longer available

Reply sent