Search results

1 gallon in 4 months. To fix it right it looks like the whole hydrostatic need to be removed.

Has anyone anyone had issues with their bx series (BX25 in my case) leaking where the side case cover meets the main case? It is leaking right through the factory sealant. Looks like a pain to fix correctly.

It looks to be running down the crack of the case and the cover. (Unpainted and painted) but I don’t see anything leaking above the support.

Everything is removed. Deck, FEL, and backhoe. I will try clean, no moving, and baby powder in the am. it looks like it is coming down from above the power beyond or the hydraulic filter.

I have a 2012 bx25 that has started leaking under the rear axle. If the hydrostatic fluid is full it will seem to constantly drip. I can not seem to find it anyone have any ideas? the vent is ok (not leaking) Looks like maybe from somewhere about the power beyond block. The picture is the oil...

I have a 2012 BX25D. Over the winter it started leaking hydrostatic/hydraulic oil at the rear of the tractor. It leaks even when sitting hence why I noticed it. I thought it was the drain plug but the oil seems to be coming down behind the hard lines that go to the front on the right side...

So I’m thinking about this. And I am a little confused. Using the weight of the bucket makes sense to me but why do I have pressure on the one port when I more it both directions? (Left and right) I’m not a hydraulic wizard by any means but I am mechanical.

Is the arms lift up and down the same way? Are there any threads for adding a loader valve or third valve?

That sucks. Thank you for the information.

I made my own 54” angle blade setup for my 2012 BX25. Hooked everything up to the FEL connections and the blade will only swing left. Reversed the hoses and it will only swing right. Up and down work correctly. I installed my pressure gauge to each of the FEL connections and the following is...