Search results

The bolts are tight. It's the whole 3pt arm that is angling under weight. Sorry if that wasn't clear in the OP.

Hello! Just installed Pats Quick Hitch on my BX2680 and when there is no load on the arms they are straight up and down. But, when I put weight on them lifting an implement, then angle in from the top. Is this normal... or do I need to adjust something? See pics. 1st pick is no load, 2nd...

Thanks for this!

It's a deck.. there are many places they are going in an out between the gaps.

Ya, that may work. Until it rains. Then I expect the powder will all just wash away down the gutter. :) worth a try!

We have our 2 car attached garage with a deck on top of it. Those little hornets have been living under those boards forever. We just got the whole deck redone with trex and now that it's warm, we can see they are building new homes. There is about 2-6 inches between the deck boarding and...

Eh.. I'd rather not risk more leaks. I was able to get in from the inside part of the FEL. I think it did move a hair... so far a couple hours later an no leaks. We shall see over the next couple days I guess.

Its darn near impossible to get a wrench in there. I did and I think it moved a little. I just don't like how hard it is to access and I don't want to make it worse. I'm gonna keep an eye on it and my fluid level for now unless anyone has any tricks on how to better access them/tools to use.

So I shouldn't try to reseat it? I tried to tighten in gently and it seemed tight.

Got a newer BX2680 and just noticed a leak from the FEL at one of the connection points. Before I try to tighten, reseat or whatever (don't want to make a mess) any ideas on what this could be? I think it just started this winter. The connection is circled in this pic (the connection on the...

Found the part numbers: ROD (MOWER LINK) K2581-44332 COTTER, RUE RING K1211-91112 #50 and #60 here: https://www.messicks.com/KU/96469?sectionId=273700&diagramId=926229

Well, today I was putting my belly mower on my 2680 for the first mow. Getting the rear pins lined up the right front lift linkage side just fell right out of the frame: I sent this picture to my dealer as the machine is pretty new (this will be my 2nd year mowing) and I don't see how this...

Well I'll be... I have contacted my salesman... thanks.

It was loose, but I put it back on and still experience the issue. I don't know how I didn't lose the nut and spring, though. :) Just seems like an odd issue to have.

I am wondering if anyone with a BX can post a picture of the seat, mainly the right side (as you're sitting in the seat). I want to see how much space is between the seat frame and the inside fender on other machines. Mine is so close that it clunks over large bumps.. the frame of the seat...

So I just got my new BX2680 with 60" belly mower a couple months ago. I was cleaning the deck today and removed the plastic covers. One side only had 1 of those screw on fasteners (although it looks like it should have been 2) and the right side DID have 2. So, should there be two on each...

Well, I found out what it was... it IS the edge of the seat hitting the lip of the inside fender. IF I could bend that lip just a couple mm it would stop. I can see the orange paint on the seat exactly where it's hitting. How annoying... still love the tractor, though.

I have the seat all the way back as I'm taller. I can try moving it forward a click to see if it still does it. Seems odd that something like this would get through QC.

Hi all! I recently traded in my BX1860 for a 2020 BX2680. So far I love it. The only issue I am having is now and then when going over bumps the seat clunks like it's hitting the metal on the fender. I was able to locate it on the rear right corner of the seat. It's like somehow when you...