Search results

That’s smart, I always use it, and I think I’m gonna stop and start relying on dropping the FEL and implement when I’m on flat ground. Also, as an update a service tech came out today and got it going while I was on a plane flying down to Louisiana. The linkage adjustments got way out of whack...

We also have an 8560 with the feature, but that adjustment seems to be loose. They tractor will literally rock back and forth in park. I hoped up in a M5-111 yesterday, seems they’ve gone away from this system and added a different parking brake

This is 100 percent what it’s related to! Thanks for finding that. Anyone know if this is a common issue?

I checked that boot, no tears or holes, and I don’t see any bending. I’m thinking the linkage just needs some adjustment. The shifter has always been a pain in the butt.

to clarify the shifter will not move from the park position, it is stuck as stuck can get. So far today I’ve lifted the back end off the ground to free up the wheels, tried pulling it forward, pulled it backwards, crawled under the machine and looked for and bends in the linkage. Fortunately, I...

Another question, but could low hyd fluid cause it? I honestly dont believe the fluid is low, but when something is on your mind paranoia and the what ifs set in.

That’s a good idea with the log, I have a 7040 also that has pallet forks on it right now. I was going to run out and see if I can get the dang bucket attached to the 7060 tomorrow. One question I had if temperature would make a difference, I don’t think I’ve run this in below freezing temps...

I have a 2020 M7060HD12 that is stuck in park in a field. it got stuck Sunday evening, it’s stuck on a very slight grade facing down hill. I chocked the wheels and checked the linkage nothing looks bent, and the torque stripes the dealer I bought it from seem to match up. I’ve tried alternating...

Everything from switchgrass is to soybeans. I’ve done corn for food plots with my min till drill as well by blocking every other row, but getting the rate is kind of a pain. for my self only a handful, but I am trying to start a side gig by installing food plots and CRP mixes in on the side. I...

Properties are 40+ miles. I haul with a 22ft flatbed trailer. I do have a compact min till drill and a 7.5 ft 3pt land pride 15 series disc so I could just keep what I have a maybe go up in horse power some. Ultimately I think I’d be happier with the 7060 or 7040 if I could find one used, but...

I have, but I need to be able to trailer the drill and the tractor easily to go between properties. I have no idea how easily I could back a pull type implement of a trailer.

I want to get a no til drill. Specifically a land pride 3p606nt or the Great Plains version 3p605nt drill. I found a used drill with all three boxes that weighs 2700 lbs A drill without the nwsg box weighs 2400lbs. The Mx5800 has a 3 point lift capacity of 2310 lbs 24” from the pins. I also...

Oops. Sorry, it’s an RTV 900

The 4wd stopped working on my 2015 RTV recently when I was in the snow. I get a grinding noise that lasts for 1-2 seconds and the front wheel stutters forward maybe an inch or two before stopping. I do get a light on the dash indicating I am engaged, but I did not get to really trouble shoot...