Search results

DOES A 1972 L 175 FUEL PUMP HAVE A PRIMER KNOB ON IT. IT RAN OUT OF FUEL AND WILL NOT START NOW. THANKS FOR ANY HELP AS I AM NEW TO THIS OLD TRACTOR.

Thank you Jim and Dave. I have no more questions for now but will make certain my connections are as you have explained to me. I will also use a voltage meter as per your suggestion. After completion of these tasks I will tell you how things come out. Chuck

Hi Dave and Jim. I have tried to post a reply 6 times without it working but will try once more. I disconnected the 10 gauge battery and ground wires from my original L175 NIPPON-DENSO alternator that went bad and connected them to the new MCR alternator.My old nippon-denso alternator also had a...

Hi Dave and Jim. I have tried to respond to your latest questions and info but yhe forum must have reached its limit as it doesn't record my responces any longer. Do I need to start a new thread?

Hi Dave. More confusion on my part. I am unable to do the resistance tests you sent me the info on.. My regulator only has 3 terminals IG, F and E. Your info shows an L terminal used for testing which I don't have. After again going over the manuals regulator alternator info so so kindly sent me...

Ddave I will study this to see what I can get out of the info you gave me. Will let you know how it comes out as I find out my alternator out put compared to the old alternator. Get back to you with more specific info as soon as I learn it. Thanks Chuck

Dave since my regulator has no (L) how do I do this resistance test? Thanks Chuck

E TO E WORKS. F TO F WORKS. HOW ABOUT IG TO N SINCE I DO NOT HAVE 2 Ns. Thanks Chuck

Dave, I forgot to say it does look identical to the one removed. Thanks Chuck

Yes it does from what I can see when I look at the picture. My alternator has a 3 terminal plug in at the top. The top terminal is horizontal and has the letter (E) above it. The bottom 2 terminals are horizontal. The left one has the letter (F) next to it and the right one has the letter (N)...

Dave it is not like your pictured one which I think has 6 terminals. No cap screw either.. The cap just locks in place with dimples in the cap and base. You read me right, the regulator only has 3 terminals or posts as I called them. The points inside are strange to me also. One arm of the...

Hi Dave. I am not very tecky and do not have a smart phone to take pictures with. The regulator is rectangular. On top is one post that has an (E) on it. Does it's wire connect to the alternator (E) post? Is it also the regulator ground? On the bottom are two posts. The right post has an (F) on...

Hi Dave. I am unable to find a voltage regulator that is the same 3 wire hook up as mine but was able to clean the points in my old one. Along with my new alternator I tested 12.7 volts with engine off. I then ran engine at 1500 rpms and voltage came up to 14.7 volts. I think it is good. Your...

Hi Dave. Thanks for the great drawing with the color coding. I will get a new regulator as you suggest and that could be the problem as you also suggest. My original alternator was not charging and the idiot lights quit working so I assumed it was bad. Probably should have had it tested but did...

This alternator was purchased through ebay. That is the only number I have for it. I don't have a kubota number that was used as a reference. I will research it more and get back to you with any information I can come up with. It may take me until tomorrow. Thanks for your help and patience.Chuck

Denso LN 6708

Hi Dave. I will get straight to my problems. My alternator went out on my L175 so I bought a new one for replacement. The plastic part of the wiring harness that plugs into the top of the alternator fell apart on the harness so I got a new one but I am uncertain which wire goes to which...

Hi Dave I have looked at the wiring diagrams and am a bit confused. My wiring on my 1970 L 175 is virgin I am fairly sure, but the colors don't all match the diagram. I have red to the battery from back of alternator and that is a diagram match. I also have a 3 prong plug in on top of the...

Thank you so much Dave. Chuck

Hi Dave, Sorry but I am not not real computer literate. Why I can not down load the part of the manual I need I do not know. Page 48 is all the site allows me to see. Just hoping someone could send me the wiring diagrams I need. Thanks for trying Chuck