Search results

  1. C

    L3901 rear wheel width adjustment

    That's what I assumed but wanted to check before buying spacers. Bro-tek here I come
  2. C

    L3901 rear wheel width adjustment

    so I assume mine are the R4? can you tell from the pic?
  3. C

    L3901 rear wheel width adjustment

    The manual (attached) mentions the ability to adjust the width of the rear wheels. In looking online, I've seen 2 piece rims, which I don't have. Are these tires adjustable or do I Need to buy spacers? 2018 L3901 HST
  4. C

    L3901 Battery keeps dying

    why would a new battery fix the problem given that the current one is fine, both with a load test and using the multimeter?
  5. C

    L3901 Battery keeps dying

    auto parts shop and Dealer both load tested
  6. C

    L3901 Battery keeps dying

    It's the factory battery. Still shows green on its indicator. I had pulled it thinking it was the problem. Auto parts store tested it as ok. I went by the dealer to ask his thoughts. Had him retest battery just to be sure. His advise was useless. (he felt the fact it would start when jumped...
  7. C

    L3901 Battery keeps dying

    It is stored under a carport. Just to be clear, are you saying the ground from the battery to the frame or a different spot?
  8. C

    L3901 Battery keeps dying

    I have a L3901 with about 100 hours on it. It sits for a week or 2 between uses. Always starts right up. Lately, I have been having a battery issue. After mowing for a couple hours, it won't restart (standard dead/low battery noises when key is turned) and has to be jumped. Last week, it...
  9. C

    Loose Parking Brake Lever L3901

    the trouble then is that its not pressing against the plate because its clearly not holding tension. Any suggestion on adjusting it or repositioning it?
  10. C

    Loose Parking Brake Lever L3901

    I have a L3901 HST. The parking brake lever (when disengaged) wants to wiggle forward, which turns on the Indicator light on the dash. The brake is not actually activating; its just triggering the sensor. It appears the legs of the spring (Item 20 in the diagram) aren't attached to anything...
  11. C

    Frozen PTO clutch lever

    I have a B3030. I ran it about 50 feet, then had to shut done to get something out of my truck. It wouldn't restart. The lever that controls the PTO is stuck in the "engaged" position and won't budge. Help!