Search results

I need to replace my 24x8.5-12 turfs, which apparently are no longer made. I have done the computations and I think the 24x9.50-12's will work. The Carlisle Turfmaster seems to be the most prevalent, but I have some on my garden tractor and am concerned they may not be rugged enough for...

Correction F=30.25

A=39.75 B=38.75 C=27.25 D=13.0 E=36.5 F=23.5 G=7.0 Of course A will vary with tires, inflation, etc. If you still need H I will have to get it to you later when I can crank it up.

stand by...

In case your considering a quick hitch, I found out the hard way that the Kubota ballast box does not fit on the Land Pride QH15 (Quick Hitch). I guess I should have searched the forums first, but you would think their sales pitch about matched implements.....

Update. Perhaps I didn't explain my problem sufficiently. The problem was not with the cables, it was the spools were frozen in the valve body. I solved the problem by removing the fittings, filling with UDT and letting it set overnight. I then adapted a small puller and carefully dislodged the...

I bought a new FEL loader valve for a cab model (B3030). I can't actuate the control cables, ( lever is unlocked). I don't have a manual for the loader and am wondering if the tension gets adjusted by the springs I see in the parts breakdown, (attached). If so, can anyone tell me the procedure...

Somewhat related question. Do loaders have a WSM?

Thanks guys, That's what I needed to know.

If I place an order at a dealer does he add his freight "in" to the whole goods price? If so, what part of the country do they get their stock from? I'm trying to figure total cost for some heavy pieces comparing dealers, i.e. would I wind up paying shipping "in" to them and "out" to me?

Here's a couple references I found

I'm looking to purchase a loader and do some fab work to adapt it to my B model. The salesman said he couldn't tell me the difference between the two. I found the LA 434 Operator's manual, but not the LA 435. Does anyone know what the differences are?

I believe this may help

The B2530 is a European model, 2007-2013. Long story how I wound up with it, ( I didn't know about the import thing), but I'm trying to make the best of it since it is a nice machine and has many of the bells and whistles. The nice folks at Messicks told me there's no 3 pt kit., so piece parts...

I need to buy a 3 point hitch setup for a box blade and finish mower that I have yet to purchase for my B2530. (Similar to a B2630). I am planning on using a Quick Hitch. I need the top link, lift rods, lift arms and check chains. I've searched online and checked with Messicks and there is no...

Thanks for the reply. The attached pdf shows the inspection. I will use the standard torques.

I am inspecting the oil pump on a D1105. The WSM does not list a specific torque for the pump cover screws, yet the inspection procedure entails checking the cover clearance with plasti-gauge, (1-3 thousands), so it may be important. Does anyone have any input if the torque is other than...

Thanks for the quick response. I'm new to tractors so please be gentle. B2530 HDB (hydro). I think a 2012 or 13. Has the port on the R side for the loader hydraulics. I have attached 4 files extracted from the sales brochure which may help. I did find a B3030 parts list but it may be a larger...

According to Kubota, my B2530 is "gray" market because it's a European model and I'm here in North America. I have the owners manual and WSM, but can't find a parts manual to try and cross-reference. I've tried all the links on this site and tried ordering one from Europe, but I think they have...