Search results

Hi guys this is probably an easy question. my B6000E 4wd rear tire size is 7.5 X 16SL finding a tube seems confusing to me. with the different valve stems available. can you help?

:) You don't have to be old to be dumb. In fact us old guys are wise because we admit it and learn from our mistakes. Cheers

Fun little tractor. Messicks, Colman, even had to use West Kentucky for a steering box (expensive). finding part numbers can be challenging especially for the implements. These guys are great on here have helped me alot. Cheers, Mark

Looking to replace my breather cap. I have the original part number KU10365. Can't find new number. Found a post with 70050-00041 for a B219 filler. Is it the same? mine has a 1/2 Id and a 3/4 OD. Thanks

Thanks to all, you guys help us rookies gain knowledge that isn't around much anymore. I am going to put the extra drain in, that should make it a lot easier. :):):)

Help me Obwan, I am rebuilding my lift and tilt cylinders and noticed the owner manual says use 10w-30 ms engine oil or type "F" auto trans fluid. I've been using tractor hydraulic fluid off the shelf at auto store. Should I flush and change? Any tips on cleaning the B6000 reservoir? Thanks, San...

I don't know much about clearing snow, living in san diego. but I do like the extra weight you have in your lap. Cheers

Re: KUB206 or KUB215 seal kit Hello shootem604, thanks for your response. I noticed on one of the older post on the forum that a newer backhoe cylinder had the same seal kit that my FEL calls for. That would be huge if all the 2" cylinders that Kubota made could use the same kit. Coleman...

Hello ant126, I have a B6000 old little tractor with a B206 FEL. the owners manual called for the same seal kit, may I ask if your cylinders are 2" diameter (inside) cylinders? if the same cylinder kit would help all of us with 2" cylinders I think that would help alot of us on the forum...

Hi Big Kahuna, do you still have your cylinders? I have a B206 or B215 looking to rebuild or replace them. 2" cylinders. what are the dimensions of your cylinders? pin to pin closed, hose fitting to hose fitting on cylinder, and shaft size. Thanks for your time, San Diego Mark

hello, thanks for the response. do you know the seal kit number or where to find the right seal kit?

my b6000 FEL cylinders are leaking badly. Anyone know source for replacement cylinders. KUB044 and KUB045 I believe these are the cylinder numbers. Thanks for helping