Search results

I've been running without filled tires or wheel weights over the more than 6 years and 1200 hours I've had my B2650HSD since new. All I need is my 60" box scraper on the 3-point as ballast, for as much as the front end loader hydraulics can lift. And as filled tires are recommended against by...

In other words, measure your fully-loaded clearance beneath the trailer back frame and subtract an inch or so, and use that measure to build the compression blocks.

I would NOT use this hitch as a log puller illustrated in this screenshot of the sales photo. If the log ever caught on something while being pulled the tractor would upside down on your lap in a second or 2! Think about it. If the log is a few inches off the ground and hits a stump or any...

https://www.amazon.com/MaxxHaul-50039-Standard-Trailers-Equipment/dp/B07MWRW7PV $65 !!! 1/5 the price of your somewhat schmancier unit, and besides the 2x2 receiver being included in your unit, this one does just fine doing exactly what you'll need. I got one of these 4 years ago, has been put...

Boxblade, run at angle by adjusting the 3-point side link.

I'm a SE Manitoban on 119 acres, lots of forest, 1000ft of driveway. Take a look at my profile equipment list, I couldn't be happier! And with the forestry jobs I take on with cutting our own firewood and fence posts in the "back 80 acres" I can say the B2650 ROPS is a wonderful, capable...

2017 B2650HSD bought new. 1230 hours.

My B2650 operator's manual has a section that describes when to use the oval holes on the stabilizers to allow for play on certain listed implement types. The sway looseness needed depends on the implement, some need serious play. Listed are a few, like moldboard plow, disc plow, subsoiler...

True, yet would not 10x the # available be offset by 10x the population shopping for those used machines? We've had Kubotas up here for decades, too!

Good luck with finding a used (sub)compact K in good condition, without a finding new one competing on price. I looked for a couple years before giving up trying to find what I needed in used, as the new costs weren't much more.

Regardless, there's more CA & CCA there. I look at battery warranties carefully, too.

If the replacement battery is the correct type, voltage, size, and the terminals match position and type, then the more the merrier when it comes to cranking amps advertised, CA & CCA. It basically means there's more power available under any temperature range than the old one. New tech has made...

^^^^^^THIS IS THE FIRST THING I THOUGHT WHEN SEEING THIS THREAD.^^^^ Sorry to shout, but protect yourself! Also, as there's going to be solid pressure backed into the hydraulics just from the weight on the lift cylinder, I would suggest a jack under the blower to at least take most of its...

Sounds like the parking brake actuator lever mechanism has become sticky or obstructed by debris, or one of is springs has become loose. Have you gone over the whole park brake system visually, while operating the locked pedals and locking lever? Have someone do that while looking underneath...

No, why mess around with a good thing when my Rotella T6 5W-40 contains all the ingredients for a smooth clean running engine in all weather conditions? I do add a bit of Sea Foam fuel treatment to my diesel as a stabilizer and deposit cleaner. SF has had a starkly noticeable positive effect on...

I got one of these and haven't regretted it in the least. Not granite countertops, but a full load of green tamarack (the pics show part loads) isn't light, either. And rough trails (roads) for sure. You may want to look up some kind of 3-point chain or bar stop system to keep the 3-point firmly...

Yes. Some would call it one, some the other, some both.

Found some decent snow clearing job photos to share from 4 years ago. Gosh my equipment looked WAY newer then... lol...

Ya swapping is a bit of a pain, but the boxblade is a very capable sub when pushing, pulling, and moving lots of snow around. It does ice sheet rough-up with the scarifiers real nice, too.

My B2650 open station with front-mount B2782B blower with BB1560 boxblade on the back LOVES the kind of storm you're struggling with. Heading out in a few minutes to have some more fun with it.