Search results

I was able to get the oil to drop out of the governor side on the left, I just gave up and sucked the fluid out of the injector to refill it. Topped them both off with straight 30 weight oil. Seems to be running good. Thank you gentlemen for your input 🙂

There are two big plugs on the bottom with a half inch square inverted, I’m guessing for a half inch breaker bar. I’m afraid to crack one of those because it looks like it’s full of shims and springs and stuff 😳

😂

Thanks! Yep, that drained the governor. know what to do about that injection pump? 😳

Hi guys, I have an l260P with an injection pump that has a dipstick for the governor and for the pump. I’m not sure how to drain the oil out. Hopefully somebody’s familiar with this relic lol

Will do, thank you Sir! :)

Hi guys, I have a 4 wheel drive b6000 That I need to switch engines. Does it break in half? Or do I have to Pull off the front axle, then the engine. Not sure how the drive line and the clutch will line up at the same time. Would appreciate any suggestions. Thanks!

yes it is! thanks!

Wow that's the whole set up. I will definitely need all of that stuff. Now if I could only find this splined ones That come out under the seat.

I'll check it out , Thanks!

ok, now I can post pictures :)

Want to buy B6000 Lift arms. :) left lift arm 66591-36733 right lIft arm 66591-36743 thanks!

In need of a b6000 fuel tank. Mine is missing completely. thanks!

I'm excited to try My B6000 Next spring. The even smaller tractor I've been using, I run a small Single bottom plow across it first. After that the tiller works smoothly and effortlessly :)

Wow, thanks for the info! After checking on the upper bearing part number, now I'm confused. I cross referenced the Upper bearing number And Most places say it's a 40MM od bearing. On mine I don't think it can be bigger than 32 MM od. I better do some more measuring.

Hi guys, I'm new to the forum. I have a B6000 Steering box That looks different inside than the ones I see online. I'm hoping I can at least find bearings for it. I guess I'm not allowed to post pictures yet. I do have a picture of it in my Albums though.