Search results

How hard is it to get the bushing out? Do I have to remove the whole assembly or is just taking the steering wheel off , pulling the seal out let me get to the bushing??? Messicks shows the same seal and bushing for the top of the steering column no matter if it's manual or power steering...

I have a L2350DL and would like to know the best type of 12V aux control valve that mounts on the frame loader support. Should it be a closed center , double acting ETC.

Off and on I've been having a problem with my tractor not starting for several months. today I found the problem after changing the battery that was really old and battery post clamps squished closed. So it happened again, I finally found the clutch safety switch and made sure it was adjusted...

My newest item I bought for my L2350DT is a bucket tooth bar. We have hard clay soil here and this tool is a must add on. There is no drilling , it has 1/2-13" set screws that clamp it to the bucket with acorn nuts that cover to keep dirt out, I got the 48" one. There is no drilling through the...

So I was in the process of changing my fuel filter and there is no shut off from the fuel tank. I was unsure of clamping the hose off with vise grips to stop the flow, I need to replace the fuel hose anyway so I'm going to wait till it's almost empty. I bought some clear 3/8 hose from McMaster...

https://www.tires4that.com Not sure if this has been posted before.

1. Will my L2350DT be able to move a 5ftX4ft round bale? I googled round bale weights 5X4 around 1100lbs & up, 6X5 - 1400lbs & up, I know it depends on density & moisture content. I'm thinking of buying a 3pt bale spear, I think the tractor manual says 3pt will lift 1800lbs. I also have a...

I just joined, I have a L2350DT W/loader bought it last year with 925 hours. I have a 52" Taylor made rotary mower I bought new condition but was a auction purchase from a used tractor dealer. I have a Land Pride post hole digger w/12" auger and a RatchetRake that has come in very handy. I live...