Search results

I bought some clear 3/8 hose from McMaster Carr that's OK with diesel fuel. On Ebay I found a inline shut off that is OK with diesel fuel. It's possible to get a 90 deg barb also. These auot shut off fuel as soon as you disconnect the connectors. Put mine on in 2019 not had any leaks . COLDER...

The diagram shows a seal and nylon bushing at the top of the steering tube.

OK, there are hydraulic lines running up the left side to the steering box. So I need item #370. So what about the sloppiness of the steering wheel at the very top moving at least a 1/8 inch side to side where the shaft comes out of the column. Again , I thank all of you for helping me with this...

OK, I'll have another look and see if any hoses go to steering box. I'll take pictures . . . Where the shaft coming out at the top just under the steering wheel moves side to side also. Most likely from using the steering wheel to help getting up into the seat. Thanks for all the help.

The bushing ..... item number 200 The seal .............. item number 210

Oil leaking at the very top of steering column and steering wheel is somewhat sloppy , moving side to side. Plus I have no idea if my tractor is manual or power steering , but seal and bushing are the same part number on Messicks list. BUSHING- BUSH 38240-16520 $16.95 SEAL- SEAL,OIL...

Thanks Dave

Same thing I'd like to do on my L2350DT

Thanks Dave, I've asked this before and you made it a lot simpler. I'm just replying to your reply. I was told if I added another valve to use one no bigger than 9GPM and make sure it has the power beyond. But I've only been able to find 11GPM minimum on Ebay. I'd like to add Hyd connectors at...

I have a L2350DT and our round bales are the 4ft X 5ft range , I asked a tractor repair/implement supplier who sold me my 5' bush hog and he said he would not recommend a rear spike as the firther you get away from the rear of the tractor the weight of the bale increases the load at the 3pt...

How hard is it to get the bushing out? Do I have to remove the whole assembly or is just taking the steering wheel off , pulling the seal out let me get to the bushing??? Messicks shows the same seal and bushing for the top of the steering column no matter if it's manual or power steering...

The search is on, thanks

You are saying a valve like this one - https://www.surpluscenter.com/hydraulics/hydraulic-valves/directional-control-valves/1-spool-30-gpm-cross-ba13ag1ed1-single-acting-hydraulic-control-valve-w-power-beyond-9-12281.axd

Many thanks Dave. So from my 7 port FEL on the tractor now , feeding from the power beyond to the supply on a new double acting and out it's power beyond. Why would the second valve need to have a power beyond?

7 , two on front of valve - return & supply , 4 on side to FEL and one on the back.

I'll have to look . All my FEL does is up down & bucket curl to dump. There is just one handle on my bucket valve , it does have floating function. LA450S Loader is what is on my tractor.

I just found some cat 1 Pat's quick change hitch on Ebay and won the bid @ $125.00 , $4.00 handling charge plus tax came to $139 and change. It was a open box item and not sure if I saved anything by driving 50 miles to get them.

I'd like to put a small cylinder on the top link for the 3pt hitch , also just having another hydraulic option would be nice.

I bought this tooth bar, no drilling. Shipped from Washington state near Yakima. , right to the implement retailer in my home town. $435.00 total cost. No drilling required clamps on using 1/2" allen studs, they top them with acorn nuts to keep clean. It's tempered steel also...

I have a L2350DL and would like to know the best type of 12V aux control valve that mounts on the frame loader support. Should it be a closed center , double acting ETC.