Search results

Thanks Dave, problem resolved by Re-seating the quick connectors. I originally thought about that, but dismissed the thought by thinking that it would not rise at all if it was hydraulics related. Live and learn, I dodged the bullet this time. Thanks again!

I have a B2620 with LA364 front loader. Out of the blue the loader only rises half way. It rises the normal speed until it stops, kind of like there is something physical limiting it from rising more. The hydraulics are still whirring when attempting to raise it more. I have inspected all the...

Here is a capture from the workshop manual related to this.

Thanks guys, this was gold! I got another over half a gallon drained from that plug, so I'm now little over 3.5 gallons total of 4 listed on the spec sheet for the tranny oil. I found this plug from the work shop manual, but it is listed under clutch section, and not on the service and...

I measured the drained oil, 3gal even. I was "full" per the dip stick before draining, so there is still 1gal somewhere. The question is that am I missing a drain plug or is it in the cylinders and undrainable. Any thoughts would be appreciated, I will need to use the tractor tomorrow, but...

I can't figure out where the 4th plug is. I have opened the one by mid-mount PTO and two in the back, but where is the fourth one? I believe it's the one on the below picture labeled as transmission case, but I can't locate that, mine doesn't look like that. Both the operator's manual and work...

I'm about to tackle the transmission fluid and filter change on my B2620, but I'm slightly confused, are there 3 or 4 drain plugs?

After doing more research, this is how I understand how the hydraulics on the B2620 should be modified to work with BH65: 1. Disconnect the existing metal hydraulic line from the Power Beyond port to the 3pt hitch. 2. Connect a new hydraulic hose with suitable fittings to the PB port, this is...

I have a 2013 B2620 with the FEL and I'm looking to add the BH65 backhoe. I was lucky enough to find a used BH65 for $4k and I'm considering to buy that. That being said, I want to make sure that I will get it hooked up to my tractor without getting charged an arm and a leg in the process. The...

I also found a used BH65 with the subframe for my B2620, but without the hydraulics kit. Can you let me know, what was included in that kit ? Did you get any instructions on how to hookup the hydraulics ? Mine is factory B2620 with no modifications. Any help would be appreciated!

I'm on the same boat, I have a B2620 and I found a used BH65 with subframe, looking help to get the subframe installed. I will also need help with the plumbing part, getting the power beyond setup for the hoe. Can the plumbing changes be made using generic parts without having to purchase the...