Search results

Hello, just wondering what some of you guys that work on your machines do for marking the actuator valve and or open lcs when installing a new seal kit. If this isn’t marked properly how to you determine the position in the valve bore? Thx

Hi, model is an m100x . Just wondering if there’s an easier way to change the hydraulic hoses from the pump (under cab). I don’t see anywhere in the wsm about there being an access door on the cab floor. I don’t really want to put the entire cab off . Thanks

Hello. I have a m100x with a grapple bucket and I’m just wondering the easiest way to approach changing my hoses from the pump to mechanical valve that runs my bucket. The 3 hoses run under the cab to the pump and I’m wondering if I need to lift the cab off or if there’s a better way? Thanks...

Having issues with my ALO hydraulic valve . I’ve posted a picture for reference , the 3-4 side has no issues but if you look where I’ve labelled 1-2 it is shorter and seems to be stuck. I originally thought the cable was pooched. The pressure from the pump is fine. Just wondering if I should be...

Anyone have an idea what this could be ? I’ve pulled the water pump and it seems to be ok. I’m not sure where this is Comin from . Machine is an m100. I was underneath the tractor when I took this

My m100 is leaking between the water pump and engine block. I’ve replaced the seal between the 2. Any tips or tricks to get this thing to seal properly ? Thanks

Hello, I just got a water gasket and some o ring replacements for my water pump on my m100x. Is there a trick To getting the hard coolant line with o ring to set in the pump ? Having little difficulty. Any tips appreciated. Thank you

Rtv 1120 stopped going in either direction . Pulled the engine transmission out . I don’t see any damage to the coupler. Looked at the gears in the transmission nothing seems to be overly worn or damaged . I haven’t taken apart the hst yet . Would a worn swash plate cause no movement ? Really...

Hello. I have a x1120 thats giving issues where it will not go forward or reverse. I have checked the pressure on the HST ports and I am not getting anything for pressure. When i pulled the shaft cover joining the hst to the drive box/engine it was not engaging at any rpm. Just wondering if...

So, my cooling issue was fixed but today after pushing snow for 6 hours, I went to cleared my bucket and my dash threw an E-ENG 99 code and went down to idle. and started chirping and making noise. I have searched high and low for these codes in the WSM with no real luck. Maybe the moisture...

It seems like kubota certainly has its fair share of wierd fittings and sizes for just about every part on the machine. I've been trying to track down a coolant test kit for my m100x (v3800 engine) for about 5 days now. I guess my only option at this point is getting in touch with my local...

My m100x is leaking coolant pretty good and hard to detect the source of leak....Ive changed the top hose, thermostat and gasket and its still leaking like a civ. Im wondering now if its the water pump. Any tips on how to nip the leak point. I start the tractor and seconds it starts leaking...

Hello, my m100 has some crusty white stuff around mostly the top coolant hose, It's been slowly leaking coolant from somewhere and I havent had time to look further into it. The engine oil looks perfect. When its running you can smell that sweet smell. I'd like to test it and maybe change...

Hello gang, So i installed a new shift cable on my rtv 1120 because the boot had seen better days and it was getting impossible to put it in reverse. My question is im having an issue tightening where the cable connects to the transmission. Just wondering if theres anything I can do to make...

hey guys i have a m100 with a v3800 engine, 2000 hours . It was running for a while and as soon as you goto move it then it just dies out. i have the flashing warning engine icon on my dash but hard to diagnose when I don't have anything to diagnose it with. So far I have changed the fuel...

I have an 1120d that for some reason shifts rough into low range and doesn’t want to stay in reverse, it’s a fight. I’ve tried to adjust the shift cable with no luck. Any suggestions ? folks. Could it be an issue with the unload spool? Thx

My 1120 with the d1105 has kinda been a pain in my arse since I got it. When it runs good it’s great but right now it won’t start . I’ve changed the fuel filter with no luck. The only other thing I can think of is the small fuel lines could be plugged ? Lifter pump? Anyone else have this issue...

1120D starts then dies. So my 1120d has 720 hours on it and for some reason it starts and runs for about 10 seconds and dies. After a couple times it will start again and run rough . My fluids are fine , my fuel filter was just changed. I ran additive through it before the temperature dropped...

Hi, so I've basically changed all my hoses on my m46 loader and nothing shows any signs of leakage or seepage from the hoses,fittings,cylinders. I do notice that my compact valve has a bit of oil residue on it. I just changed my tractor hydraulic filters and udt fluid so id like to figure out...

My tractor is going on 7 years old now. Still starts but with winter almost here I might change it out . What’s the general life of a battery . Our winters are fairly harsh.