Search results

Sorry, no. These are fully functional tractors and are being sold complete. Thanks for looking and asking.

a very quick perusal of the ordering numbers info at Carling shows there is a maintained "on-off" option #2 that can be specified for the pushbutton, as opposed to the momentary action.

thanks for the humour...the spring is nonexistent and undoubtedly is quite tiny. Biggest challenge is the old eyesight: will have to set up the luxo magnifier or the neurosurgeon binocs and give it another go...will wait for a rainy day and have at it again, but I think its beyond hope. There...

No Joy. After the WD40 suggestion failed to make any difference I took the switch apart. The detent mechanism, presumably a ball and spring, were totally rusted in place. No effort would move the ball and the spring was no longer extant. Since I very seldom drive this tractor on public roads, I...

Thanks for that. I will try the WD40 suggestion and fire up my index finger. Hey, I'm up in Canada and we measure project time in "N" x beers. Sounds like a 2-beer job.🍻

What they said, and a bit more as follows. I have a BX2380 and formerly a Massey GC2300 both with 60" decks. I got an excellent finish from those, but it all depends on how fussy you are. If you are looking for golf greens, you will not get that level of quality. Also, if you need to do a lot of...

Recently purchased a BX2380 I believe its a 2019, only had 116 hours. There is a stamped slot in the fender, right side, that has marks that suggest there was a bolt or knob there. Diagram below indicates the slot, but it does not show anything there other than the empty slot. What is the...

Mea Culpa, Mea Maxima Culpa...I had fallen off the (OTT) front porch and I plead prior busyness. A lot of the parts from B6xxx, B7xxx possibly B8xxx are interchangeable. I get a lot of the small parts from the local K dealer Stewarts Equipment (formerly Earth Power) in central Ontario. Call them...

Hello Orange enthusiasts; Recently bought another Orange tractor and have the following available; B6000E-2WD w/turf tires, B6000DT-4WD w/ag tires, both with 3PTH and both with front clutch pulley. Available original Kubota attachments being offered separately are front mount snowblower...

Reverser: where else are you going to find one? The last US machine shop that was making them the selling price was around $800USD IIRC. I've ordered from Tracpartz previously, shipping was not expensive as long as you don't expect it overnight...There's no point in making a comment about...

Greetings! I have two B6000's; an E (2WD) and a DT (4WD). Both are geared, no HST. As for the radiator, Tracpartz has new ones for around $240USD plus shipping from NL. I have used them before for B6000 parts and shipping is not expensive as long as you don't expect it overnight...

Undoubtedly you must find that $600+USD on Ebay for a used reverser (on the very rare occasions when one surfaces) or $800USD for one from the US company that makes them new is more attractive? Add shipping to that of course. Dunno, seems to me that $266E plus shipping is very reasonable...

B6000, B1400, B1500, B5000, B7000 PTO reversers are available brand new from Tracpartz Netherlands (tracpartz.com) 266Euro = $300USD plus shipping.

A little late to this dust-up, but new PTO reversers for the B6000 (and other Kubota / Zennoh CCW PTO models) are available from Tracpartz in the Netherlands. Buy one! Keep them in production! In other news, Woods made a 3pth finishing mower model RM48 that can be easily adapted to the reverse...

A recurring theme with B6000's in this and other forums is what to do about a leaking or broken oil bath cup. Some enterprising fellows have cobbled one together from sewer drain PVC pipe. For those of you that are fussy about appearance or being able to check the oil level visually, the parts...

I just happened upon this thread; I have 2 B6000's, a DT and an E. There is no center PTO. The mower deck is driven by a mule drive/electric clutch that is driven by a shaft out the front of the motor. The electric clutch is a US-made item and the mower deck was made by Woods-also USA. Tracpartz...

As far as I know, they were only "Grey" in the USA, not in Canada or Europe (and obviously Asia). In Europe B6000's seem to abound like weeds. In Canada, the occasional dealer seems to run with the US directives, but none of the ones I've dealt with (6+) have given me the bums rush out the door...

Well then! You lot have hijacked this thread and made it about le langage de l'amour! I was living in Panama for a few years and when I returned to Montreal, the Parti Quebecois (Separatist party) was in full bloom. Seeing as I didn't have a pure French name, the job outlook was bleak and I...

TracPartz Netherlands is a good source for both OEM and aftermarket parts. I was just looking for something else and THEY HAVE NEW PTO REVERSERS FOR B6000 available! They call them "Inverseur" (is French) $266 Euro (way less than used PTO reversers on ebay which are posted at $600USD ++) plus...