Search results

Center of hub, green arrow.

Thanks!

The part #'s are always a mixed bag. Sometimes they don't come up if you use the dash or the 0. I have a leaky seal. Just was wondering about the clips worked and how many on each shaft. Thanks!

Have he parts manual and was looking at the part #671565682 set collar. It says qty 4. I assume that's four all 4 wheels. Found the part and it looks like a half ring. A little confused on how it works. Wanted to get all the parts I might need before taking it apart for repair. Any help?

I have the above tractor and I need the single wire female connector to the starter solenoid. It never had the connector since I bought. I has a spade lug right now and it tends to come lose or corrode and not pull in the solenoid. Is there anywhere that carries that specific connector. I have...

Haven't heard of a BSPP banjo. I have it pretty tight right now so I hope to fire it up today and give it a good test. Thanks!

Lucky day! I went out and checked it and the bolt was really loose. Got my impact metrics out but couldn't find the right size. Jumped from 24 to 27. Ran to Lowe's and bought a 25&26 started raining couldn't tell if the fit yet but resorted to adjustable skinny type tool I had and vise grips...

Should be 120 coming from the pump. Thanks!

I"ve been losing hydraulic fluid and today I saw where it was coming from. The main line from the pump to the Hydraulic Block where it bolts in is leaking. I haven't tried to to tighten it up yet. I have the repair & parts manual. My question is can you do it without removing it to replace the...

Looking for an instrument panel complete for the above tractor

Looking for a panel for the above model Kubota.

Looking for a complete instrument panel for the above tractor.

Thanks, but I talked to Messicks, and dealers and no one has any stock or can get them.

Thanks!

Thanks!

Not available anywhere I could find.

Nope

Have the old B2150HST and the labels for the PTO speed, 2WD-4WD, and such are all worn off. Owners or shop manual aren't labeled. Can't find any on-line. If I had a good picture I probably could get some made. Like to have it so anyone would know what to do when operating it. Any suggestions or...

I'm thinking a 16mm socket would be what I need to remove the rear wheels. Am I right. Don't have a lot of metric tools and living in a small town you just can't run around the corner to a good parts store and take it back if the wrong size.

I have a B2150 with turf tires. The fronts are 23x8.50-12 4PR. The rear are 13.6-16 4 PR. That's what is in the Kubota manual I have.