Search results

I just changed mine to Peak. I used prestone in my 6.2 truck and had to have the radiator rodded out to repair it.

You will be able to see the teeth...there should not be any missing...The gap is where it gets bad.The face of the teeth can be faced with a file to true it up and make the new bendix engage easier.

That hard hammering when cold is the pistons trying to warm up and adjust to the cylinders...There is slack in the cylinder when cold, or else it would sieze up when running hot. Gagging a cold diesel is expensive, and it puts more fuel into the crankcase and oil...Cooling off on turbo equipment...

there is plenty of commercial cleaners available. I have used both of the one's you mentioned. Be sure the cascade is not lumpy when you pour it in to radiator. Flush the system real good with fresh water after use. you can back flush. I recommend you remove the block drain for best result...

Okay, Yes, sealed....They will do it.Electric shift like most cars now.."No Dipstick" It has 100k warranty, I have always done a pan change at 60k on any thing i drive, 8ok after that. This dealer said "only if service was severe". Chevy Equinox uses same type transaxle.

Please consider: If you disconnect the neg lead you cannot fry or hurt the alternator while charging..If you short the pos lead you can be in the midst of a battery eruption. Depending on the condition of the internal connectors and acid vapors.Batteries can blow the whole top off and blow acid...

Hang in there Bulldog. There are always conflicts, that's why they call it Life. the guys at the Hyundai shop said that " Synthetic oil is not necessary" < we will just have to see about that fact. I know my Camry climbed 2 mpg, from Syn. in the motor and frontdrive gear-box. I will just have...

Thanks, man I had forgotten how that woman made me feel...Did not remember the special T-bird. I did love those white puppies, she was proud of her bod.....Jy

You bet ya, Some diesels tranfer sulfur from the fuel to the coolant and engine oil...This can be caught in it and can cause wear on your freeze plugs and other parts. You are not saving that money, by not servicing it.Plus what does a water pump cost for your rig? legal diclaimer. Jy.

Leave it ,my Bota has about 15 bolts holding in the tank. I abandoned the idea and just rinced the tank in place. I had removed 10 of them...So. JY.

This is a great site to learn from. I don't have a Homedepot within 30 miles, but a Lowes is in town 8miles so.For the hooks, I might have an old chain, that can part with one, but I am going to use a second grabber type, welded beside it. I know those wheel nuts and bolts will be coming in...

I am attempting an 750 hr inspection on this engine, I don't have the torque values on checking the head bolt torque, or on tightening the valve cover back on. I am going to inspect the breather vent and would like to check the tappet clearances since I am in there, if i can get the values here...

Very good point about placement. I had noticed the bucket span laps the front by almost a foot. I had wanted a 5 foot, but it did not happen that way..I may just try one in the center, and a piece of angle welded to the back with it? That is for,when I finish my checkup on the engine. JY.

Speaking of nuts, what is the opinion on locktite?Or would you rather use nylocks, but they are expensive and not in metric ? I have many missing fasteners, especially on the wheels,on my newly aqquired rig?I know my Chevy diesel Pu ate and shook bolts all down the highway, with the use of...

Bulldog, Thanks for the photos of the bucket. The bucket I have is simular, but the idea of the reinforcing plates for the hooks was a nice touch, and I can get the welding done and bolt them on. Details, I see you used grade 8 bolts, strongest available, good safety tip.JY.

Hi, My desire is to purchase good wheels for my 4wd L3000dt.It has Turf tires and I want to keep them for now. I just bought this tractor from Ebay. I have a lot of work to do at my home involving moving dirt with the FEL. I am located at Millington, tn. North of Memphis. I could use a nice used...

Hi, I started with Sears Beam type years ago for automotive and it has served me well. I now have the break, and click and a dial type. I always try not to exceed their max ratings..They all have their uses and functions. I bought two of them second hand at sales, they checked okay. JY.

Hi, The tractor came in last night after dark.The 2 stage Air filter mentioned above cannot be located at Coleman's or Messick's. At this time I have several parts to replace on the hood, headlight area, so this will go to the back burner for now. Tractor seems to be in good condition, even for...

Thanks, i want the basic rig, for much of the same reasons. I have worked my 8n ford for years. It is very basic, but Tough..I usually choose autos without the frills, as they have served me well, thru the years. JY.

2 more cents, Craigslist is full of scams on tractor deals. generally, no phone number and refusal for inspection, look out!! Plus sending checks to other countrys??JY.