Search results

Probably too late now, But Checking with a Mechanical Oil Pressure Gauge would Confirm whether your oil pressure was good or not. I don't know if there's a way to spin your oil pump in the state you motor is in now ( Like Priming the Oil Pump in a Gasoline engine with a drill) depending on what...

I was Bush Hogging once and on my 2nd pass was wondering what a small pile a trash was that I didn't see on my first pass, Well is was my Wallet :( Lol, Credit Cards and all cut up into fine pieces....

Dang, I was just doing this very thing yesterday not knowing any better, I had my bucket tip pointed straight down and enough pressure to lift the front wheels about an inch, then pulling back to knock down some high spots in a clay front yard.... But not anymore Lol

any other signs of shavings or possibly pieces of the cage?? ( Had to be a broken cage for the roller to come out ) Or, Wishful thinking would be that is a Check Ball for a oneway circuit in there somewhere, an anti drain back :)

My Neighbor has an MX5200 and a Woods Heavy Duty 6' Brush Hog with all the Dangling safety chains and stuff, that thing is Massively Heavy. It will bounce the front wheels off the ground. one time it sheard the top link 3/4" bolt, I had to get him a Hardened bolt to replace it with. I'm not sure...

I Bought the Titan QA Plate and welded the Carraige from a fork lift we were scrapping to the plate. I only have have $125.00 in it :) if you can find a forklift repair place around you- you can probably buy a carraige and forks for just a few hunded bucks, if that !!! I'm very pleased with it...

I bought a Blank Titan plate as well, Then welded the Carraige from a Forlift we were scrapping. I have 36" and 48" Forks for it. I'll have to get Pics, the only $$ I have in it is the Titan Plate. I'll tell you that you Can NOT See the forks on a Tractor like you can on a Fork Lift, I had them...

My Neighbor a 72" Woods Brand with all the dangling safety chains and stuff on his MX5200, his mower has to weigh 1200-1300lbs. He has a front Loader as well, I mowed with his after working on his mower and going up hill when the turbo came on it lifted the front wheels, Impressed Me with the...

If his tank was full he couldnt have fit any, How much fuel was in the tank??

The same motor is in some Kubota Powered Generators with a Turbo that make almost 59HP :) Me being Me may pursue this when the warranty runs out and the Tractor is paid off, I cant leave anything alone, and certainly not HP on the table..... Lol

I don't know this motor, but it sure sounds like a coil going bad. Ive had it happen on a car and a riding mower, Run fine until up to temp then die, after cooling a bit it'll run then die.. a carb issue wouldn't vary with temp like that.... Good Luck...

No, it is a Gear shift, it was 2 (hi) is that considered 6th gear?? it was a much taller gear than my Lil 35hp could ever do.. But now I see they have my same 3cyl motor in Generators and Skid Steers with a Turbo, and it makes 50+ Hp :) Thats right up my ally when the warranty expires ;) My...

I worked on my neighbors MX5200 and had to test it after, I was amazed at the power it had spinning a HD Woods 6' rotary mower going uphill in 2nd gear. when it felt a load I could feel the Turbo coming on to help.. pretty impressive, and youve got more than that :)

I was doing the 50hr service on my tractor and decided to replace the Hyd fluid filter, when I crack the filter and oil starts running out it never seems to stop or slow. I bought two extra qts of UDT2 but the amount that ran out exceeded that so I screwed the original filter back on. do I need...

Spend the money now,Ask for forgivness Later :) ( Thats how I have 6 Chainsaws ) Lol

If you need to eradicate Wasps, Hornets, Yellow Jackets then you need a product called Tempo Dust 1%, I had a Yellow Jacket nest in the ceiling above my den that was bigger than a 120qt cooler, Two good puffs of tempo dust axed the whole thing. Now I put a puff once a year in any crack/crevice...

I have the L3560 with an 805 loader, No Backhoe though. My neighbor has an mx5200 and I think my 3560 has a higher 3point lift rating than his.

There's a place in my little town in TN that builds Hyd cyl's for some big name companies... Look up Dalton Hydraulics. They make cylinders from scratch... They can probably hook you up.. Pricing I have no idea about... :)

My new L3560 came with the same Loader.. I use this tractor a lot more than I did my old Massey without a loader.. I'll go cut brush that didn't even need cutting :) Just to ride the Tractor :)

GST here as well..