Search results

I want to thank everyone who helped me out on this.... Thanks again !!

I found that diverter on Ebay, it wasnt cheap. I think I paid like 80.00 bucks for it. I knew what it did, I just wasnt sure how to get it mounted to the tractor and how to utilize it. I think I seen complete kits from AquaHot with all the fittings and clamps for like 150.00 or so. I guess in...

Hey Mike, Thanks for all the help on this. The pics really cleared it up for me, I appreciate it.

Larry, same question for you as I asked Chim, did you plumb in any valves to shut the heat off in the summer, if so, where did you locate them in the system ? It seems to me that I would need to re connect the by pass if i were to shut off the water to the core in the summer ?

Did you plumb in any valves to shut the heater off in the summer. if so, where did you locate the valves ? It would seem to me that if you would want to stop hot water flowing to the core, then you would need to go back to utilizing the by pass ? Thanks for the pics, they confirmed what I...

Any chance you can give me a quick rundown on the set up you have coming off the by pass on your tractor ?

Ill take a pic or two tomorrow morning of the Curtis and post it here. I paid 3100.00 for the cab and had to do alot of cutting to the cowl. I was told by Curtis that there cab for the B7610 was designed for the standard Kubota loader not the Woods loader that I have. I did a bunch of research...

Thanks for the opinion Dave. Its just between the heater and the diverter block, not to mention the wiring, hoses and whatever else, Im going to have some money tied up in this and Im sure ill eat it if I try to Ebay it all. I have noticed that the tractor has a hard time building heat. I just...

Thanks for the reply on this. The hoses on the aqua hot are 5/8. The hose off the top of the bypass looks alot smaller in size. I even had second thoughts about tapping into it due to the size. I knew I would have to go up to 5/8 to attach to the heater. The hose that runs out of the block is...

Hello, brand new here and I have a question already ! I have a B7610 Hydro that I recently installed a Curtis soft side cab on a few days ago. I purchased a AquaHot cab heater. After doing some research on the web Im finding two primary locations to tap antifreeze. A T-fitting off the lower...