Search results

I did purchase 14mm fine thread bolts. I was hoping a that I could get a couple of the new bolts attached and get one side of the loader better stabilized... but no luck, yet. Thank you for your thoughts and suggestions. Edit I did find a couple old mounting bolts inside the loader...

I have been using my tractor a LOT in the last month moving snow for myself and the neighbors. Today the loader started having a bunch of side to side play. I determined that the right side bolts that hold the loader frame to the engine had loosened. Two were gone completely, and the...

Update Thank you to those that replied and offered suggestions. The culprit was the safety switch on the forward/reverse shifter. I believe the other safety switch on this model is associated with the pto, as the seat does not have one. That being said, I am back in business...let it snow...

Does anyone have a diagram of the location of the safety switches on a 1991 L2650 Kubota. I fiddled with it today without success. I know that it has to be in neutral to start, assuming the PTO has to be disengaged as well. Fortunately no new snow predicted as I am waiting for parts for the...

With a recent cold spell/snow there wasn't enough juice in the battery, and I had to jump start my tractor a couple times. The last time a couple days ago, it started fine no jump start, and I put the charge on for a full charge on the battery. However, today it would not turn over, either...

I removed the control handle , and also remove one of the 3 ball joint/swivels that attach to the actuator rods. I took the nut off the L bracket, which allowed the remainder of the assembly to slide forwatd. I did not have to remove the quick connect hoses from the valve body. Fortunately...

Thank you all for your suggestions/advice/tips. Hose is replaced, nothing leaked after an hour or two of operation, I need to drain a little hydraulic fluid from overfilling, but access in and out of the driveway is MUCH better!

This needs to slide forward, but there is not room for the bolt to go through the houseing without taking the control handle off, and possibley removing the silver bracket as well Hose underneath in top of photo needs to be replaced, but design of valve precludes getting wrench on fitting...

I'll try to post some pictures tomorrow.

Well I tried to remove a broken hydraulic hose on an L2650 w/84Q Loader, but could not get at the fitting attached to the control valve. Very frustrating to say the least, so if you have any advice, I'd love to hear it. Thanks!

I have a Kubota L2650 with a SMC 84Q front end loader. I blew a hydraulic line while plowing snow. I've partially disassembled things, but the box that the control valve sits in WAS NOT designed by someone for replacing hoses. I've detached hoses at the quick disconnect fittings, removed the...