Search results

we like ours but the lights are a bit cheap and break easy ,but we don't need lights and for a property utility tractor it s real good runs perfect had it about 7 years AND ONLY put a bit over 100 hours on clock , ours was a short lease turn in with less than 150 hrs on it , and that was pulling...

hey that's some NICE work ,nice bumper....Jerr

yes D2cat , its on the list just want to aquire every thing before tearing it down , I plan to rebuild as lil foot did and fit to my b7800 at same time then get rid of the 6100d ...thanks Jerr

I made some calls on the 80.00 parts bag , as I wanted to know what was included , finely got a call back today and the person I talked to was also surprised to find after opening the bag there was.... 3 plastic seal/washers & 7 rubber O-rings 1 of them a larger thicker size , person who called...

is it a b7100 or B1700 you post mentions both I assume you mean b7100 . you mite want to give as much info you can get on BH like is it self pump ? what is the length of reach like 5 ' 51/2' 6' 7' and weight of hoe , then mounting system ,does it come with brackets /subframe or three point...

hmm ,this is interesting as my b6100 has the wheel an hub reversed of picture , Im thinking there is more than than one way to mount those hubs to wheels and hubs to axel , I well have to have a go as Ive rolled mine more than once and I have NO ROP . and its not fun pushing it back on its feet...

Wow . very good post ,great info, every thing I need .thanks LIL FOOT ...Jerr

the seal kit as listed is 70020-00753 80.00 I even called CS cause I thought it was a misprint , and was told Just seals ,o rings & mylar seals , I about choked ,and that's just 1 spool need six ... SOOO lilfoot that brings us to your rebuild , you say you replaced o rings and cleaned spools...

wow , that's funny those our the units I have the 219 & 670 mounted to a b6100D , I remember a rebuild blog on the 670 BH ,was that you ? If so, did you rebuild any of the spool valves ? ( LIL FOOT caught your post on rebuild on post for the BH 65 ) thanks for the info on the oil I have...

I have a couple old implements 1 a loader and the other a BH both kabota they both call for 10-30w motor oil or type F tranny NETHER call for hydraulic fluid or ut2 ....Is there a difference ? WE are talking hydraulics here Jerr

just guessing here , but what you explain does not seem right to me as the boom and dipper need to work in unison to be affective . I have a little b670 BH and both work together to dig a straite bottom trench , that said playing /working on my lil 670 ,I Would GUESS the problem lies in the...

well looking over the manual /parts diagram , I see the b670 BH shows these restrictors on the two cyl. that handle the swing . But are they there ? I don't know cant get down there while unit is mounted ,but interesting none the less Jerr

well call me a blue face gopher , I thought it was a sign of worn engine /low compression on my b6100.. I have never noticed on my B7800 as its auto glow plug on key turn (glow plugs come on just before start), BUT well pay closer attention in future ... thanks reassuring info ... jerr

my 3300 hr b6100 is tough to start , needs glow plugs for a count of ten all the time unless warmed up , I have been told due to ware and compression loss , getten ready to sell it , so I well watch this post for info .

hello I have an older kabota b670 bh that has a squealing relief valve , ive read that these can be shimmed to increase spring tension to bring pressure back up , this is an older backhoe an has the hexagon shaped valve , safe to assume just fit a socket to it and back-it out and add shimm as...

that looks like the ticket, thanks Jerr

hello again, I have a older b670 BH and note the side to side boom movement is very fast compared to ALL other moments ,all are hydraulic cly controlled , but the side to side is very small short cylinder's compared to all others so Im thinking why so fast of movement, that said I see no...

hello newbe , want to mount my b670 BH (made for B6100/7100) to a newer 05 b7800 tr, is this possible ,I know I well have to fashion a mount but does not look to overwhelming since the b7800 has the loader subframe . Reason for this is then I could get rid of older b6100 tractor but use ALL...