Search results

I have a John Deere Hydraulic Dump Material Collection System that I used on my old tractor. When I purchased the 7300 with a RCK 60-24B deck the deck attachment for the vacuum hose was too small for the larger deck. Is there a deck leaf attachment for that size deck opening? Anyone have one or...

Kubota mower deck, snow blower, loader. Not mine but I thought there might be interest. https://allentown.craigslist.org/tls/d/kubota-snow-blower-attachment/6315574021.html https://allentown.craigslist.org/tls/d/kubota-mower-deck/6315564077.html...

Telecommunications for 32 years, large networks, fiber optics, RF Microwave, I've pretty much had my hands in it all over the years. I can say if your making a east coast phone call, cellular or land line, you most likely are on a network that I have had something to do with over the years.

I got to see Joe B in concert earlier this year and it was outstanding. One of my all time favorites.

Bingo, I cut the tie wraps off to separate the lines and I see the correct layout as you showed. Now that makes sense. Thanks for getting this straightened out.

You are correct, there is a bit of confusion on my part. The confusion comes from the PB port of the loader valve going to the return on the trans. See pic. If I'm understanding the system correctly I should be able to move the PB from the loader valve (that presently goes to the trans) to the...

Anyone able to answer my questions?

Thanks Wolfman, answers my question but raises a couple more questions if you don’t mind. Before the FEL was installed, which was done prior to me, it appears in the manual there was no connection to the tranny where the PB is now connected. It looks like it was plugged, see RETURN.PDF. Was...

I’m going to install a second hydraulic connection on the rear of my 7300 with FEL for the leaf collection attachment. Going through and reviewing the valve (Wolverine MB11B5C1) configuration with a power beyond port (PB) I also noticed the FEL valve has a PB port that connects to the...

Seeing the same issues. I've been in my industry for 35 years and know the industry and people. The number of resume's I see that are flat out lie's is astounding. What are they thinking when they put this stuff down on paper. If I had the time I'd interview a couple just to see how it plays...

I've done a few knifes, all done with a blade blanks. I would like to do a full knife starting with a piece of steel and a chunk of wood.

Learned something new today. Never used Fluid film but will pick up a can. Wonder how it would work on a motorcycle chain?

Last night I installed my new Piranha tooth bar. If we ever get a break in the weather I'll get to work and try it out.

After reading the reviews I decided to buy one for my tractor today. Sounds like it's going to work great.

Put together a rear weight from materials laying around the shop, all I had to purchase was the concrete. I've been looking for a project for the keg for a while and this was as good an any. No idea why the pics came up sideways?

Yes, only one line off the block that powered the dump on the leaf collector. I never thought it was the proper set up, it's the way I got it and it worked. Sounds like I'll be ok in just plugging the block.

Thanks for the info, I found the return plug in the manual but couldn't find the supply side info.

Trading in for a 7300 w/FEL and 54" deck. Getting $4k for the 7100 hst, 48" deck with 1020 hrs. I think it's worth more but don't have the time. It's super clean 94.

I hope this is a simple question. I'm trading my 7100 and need to pull a control valve off and cap the hydraulic fitting. What size and type of plug do I need? See picture.

Thanks D2, I didn't know this.