Search results

Kubota offers a factory replacement bx motor with turbo if you are interested.

To make a little more since than the guy who is anti turbo on a D722. First the D722 is 16hp. So you added a factory setup that gave you 21.8hp. Which would be 6hp at 6lbs of boost. These little kubota diesels like 10 to 15lbs of boost and a little rpm bump to get 10 to 15hp depending on turbo...

Its just rust. your bolt lined up with the groove in the shaft. penetrating oil and heat and possibly a puller or two pry sticks are your best options. Good luck !

if you live in a hot climate run the gear oil, if you live where it is colder and use it in the winter use the super UDT2 Kubota Super UDT2 provides the following benefits to Kubota equipment: Improved transmission performance and protection at high and low operating temperatures Unique...

your best bet is going to be to buy another tractor that is HST and sell the manual shift one. In the states your tractor in 4 wheel drive trim with no loader is a 3.5 to 4.5 grand tractor. something a little newer like a B7500 or B7610 would run you 4.5 to 6.5 grand for HST 4x4. Of course...

If you watch the online video most of them come this way for ease of bolting in. Its suppose to straighten out when its bolted.

the tractor wasn't split ,was it ? the clutch rod or spring may have been unhooked under the running board to fix the hyd line.

Re: B5200 question Don't always believe what you read on the internet. like the charts above, some numbers are correct and others wrong.

You are correct. I have 3 small kubota's and 3 rear blowers and 1 front, they all go side to side blowing away from the tractor. post a pic of your blower or message me.

may be interested, looking at a manual shift B7100 next week with front blade

A beautiful example we would all love to have, but for no loader that has to be a record price tag for a manual shift machine even with blower and mower.

Noticed an add for a smaller 2002 Kubota with a loader on the face book buy sell trade page today for a grand saying if interested e mail them at a certain address. I personal messaged the person and they said it wasn't them nor could I report it to the administrator. definite scam trying to get...

Re: B7100 parts still have it ? want to sell the whole tractor ?

still for sale ?

NOTE : There is also a relief valve located in the splitter block located by the pump in the one hose fitting. My hydrolics also wouldn't lift so I reshimmed the valve with a couple thin washers and it goes up now at idle instead of having to race the engine.

Is this still for sale ???

Awesome Job ! I was impressed . . .

I run a 5 ft on my B6200 and it cuts down trees the size of your arm. If the tractor will knock it down the brush hog will cut it. The guy who owned it before me had the injector pump turned up and when she labors the black smoke pours out and she pulls like a bitch ! In the pic it has a 4 ft...

I think this is an awesome idea. I think I might try it myself, if I can find a similar size hoop that hinged. Like one that came off of a john deer or something of that sort and cut them both down by the finder and put a flange on each. It would even be handy for adding a cab. Post some pics if...

I have enclosed several pics of my tractor with R1s. It originally came with turfs and the prior owner replaced them about 2 years ago with the turf size in R1 tread. I have used it all summer and it is a little bear. I have recently purchased a set of chains to cut down and front PTO gear box...