Search results

Mucked out my Percheron's favorite corners of her pasture. Graded a pad to level a water trough. Started terracing a 8' x 50' section of slope near the house for my wife to build raised garden beds on.

If you are going to use a bolt in a shear installation, it should be a grade 0, no higher than a grade 2. A 5 or 8 will cause damage or the failure may move to the next weak point.

Excellent! and Congratulations! By new (15 hrs) B2620 hasnt failed at anything I've asked it (mowing w/60" mower, discing, digging)

Hello, I've seen a few questions here and there pertaining to fuel additives so I thought I would put this report up here that The Diesel Place site was kind enough to release a while back. Results are on page 11 if you do not wish to read through the whole report. Mods - sticky...

I use a cocktail of PS Kleen and TC-W3 in the fuel of my Duramax, Jetta, and B2620.

Time on tractor? Service history?

Did my first 10 hour loader lube. Re positioned the loader hose protective sleeve in order to keep the hoses from rubbing on the loader frame (one was rubbed through the outer jacket to the steel braid). Re positioned the protective sleeve on the TnT return line where it was starting to rub...

My 2620 has two tilt cylinders. Does yours? If so, perhaps disconnect both and see if both move with control input.

Its a tablet/forum software thing. My Xoom does it too on some forums, dependent on which forum ware they use.

Yea, there could be a vibe issue with this bore and stroke combination. Interesting.

In the whole 3.2 hours (for a total of 5.1 on the clock) I've put on my '14 B2620, I've noticed the engine idles at 1000, or a bit more, and limits at 3000 rpm, per the specs on this specific engine. In the previous versions of the D1105, idle range was 850-950 and max speed governing was set...

38 for four more months.

Took delivery of my new B2620 with FEL & TNT Cleaned up a culvert I tore up getting a termite excavator stuck ......... and unstuck. Mowed. Taught the wife the new equipment and how to mow. Moved a wine barrel modified into a pasture water spigot cover out into the pasture.

Fuel shut off solenoid perhaps?