Search results

Ok i was busy yesterday an i couldnt respond. It has a tear in the shifter plate gasket and it was slinging it out. Whe i get the bucket to empty it, ill check the filter. The pump has a leak on the outlet line where it connects to the pump. Im sure that aided in draining it.

I agree. It could be either or. It leaked all of the old out so i didnt have to deain it. I noticed that because the 3point shut down completely. It would whine but not move, so i took the fill cap off on the tranny and it was empty. Oh and i WILL NOT pay $85 for UDT. This works judt as well

I had a hydro/trans fluid leak so I went to tractor supply, got a 5 gal bucket of fluid, and it started becoming jerky. has the filter disentegraded or what? I need help and quick!:confused

Oh ok. Im about 2 hours from crockett. Well, thanks anyways

I just filled in a hole with ash from a big brush pile today and graded the driveway with my 175. She has some issues pushing the blade in reverse though. Once the dirt gets about 3/4 of the way up the blade, it bogs and will start digging ruts.

Helomech, what town are you in? Im from out of marshall. I would love to see how this is in person.

No blow by, an its not worn injectors, there brand new although one does leak. The black smoke is just like a diesel truck, you floor it, the egt's skyrocket and it runs black. Im not sure whats wrong with it but im not worrying about it right this minute. Im leveling the driveway tommorow but i...

Well, about 60/40 or so. Not a full 75/25 but more than a 50/50

Actually im running 75/25 for extra cooling. Its a heavy built bush hog, 1/4 steel deck. All filters are clean. I just did a service job on it yesterday. I have to bush hog in low pto and finish in high. I think its a 540/1000 speed pto.

I have a homemade 4ft bushhog that will bog down my tractor when its at full throttle and 4low or 1high. It will black smoke and then overheat very quickly, like within 50ft of starting point. Can someone help with my issue?

Yeah but mines all aluminum. No oil cooler or anything but i wish it did. It gets very hot, very quick!

hey, i have a 175 and i have 8.3-24 ag R1 on the back and 4.00-12 tri ribs on the front. heres a vid of it.http://www.youtube.com/watch?v=ku9txwjnGes

ok. as far as stop leak goes, use the Aluma-seal powder/grainy version. its about $2-3 and its a tube about the size of a roll of quarters. it will plug the holes, but doesnt plug the lines and hoses. it just collects around the hole where the coolant is leaking and seals it off. instead of...

hey, it should have a decompression lever. thats how i kill mine but dont use it if its over 1000rpm. since the fuel systems on the L series are mechanical, theres no way to shut it off unless you starve it or pull the decomp lever

ok, i put the bottom spring plate on upside down. it was dirty and i pulled it out, cleaned it, and after watching vic's vid on bleeding the lines, did that and it runs like a charm now. :D

My tractor is sputtering and wont fully idle. If you give it throttle, it will sputter harder and die out. I just removed and cleaned the injector so i dint know what it could be. I only removed the injector because it was leakin diesel around the return ring. I pulled it, broke it down, cleaned...

Yeah i tend to do the same

Yes, i have a 3 point bushhog mower. What i said in the vid was that the belly mower worked off the 3 point and the mower was run by a pulley on the rear pto. They made front pto versions but i know i have a rear bush hog.

Ok heres the front pto vid: http://www.youtube.com/watch?v=W4SV79mJFWg&feature=em-upload_owner Look on my channel for the other vids of the tractor!:)

Ok well thanks for the info. And no, i have seen snow 2 times in my fifteen years of being on this planet and both were within the past few yeArs, but i do live in the northeast texas region so i do see more than most. Ill post a vid on youtube tommorw and ill tag it here so you can see. Its a...