Search results

Yep just pull that top lever to angle it and you can do it without getting off the machine. The pin will release to flip it for a pusher, but it also has holes so the attack angle of the blade can be shallow or aggressive. The blade does not tilt but the Kubota's cat 0 has one lift link you can...

This showed up for $100 about 15mi away from me yesterday. it's a 60" Brinly cat 0 rear blade BB-1000 (they stopped making them decades ago) . Very heavy duty. Weighs 125lbs. Works very well actually, I thought a 60" would be too wide, but with the heavy angle it works perfect. Can be...

As promised, here's a better video during a 'real' cleanup! https://youtu.be/DWkQ0IdVgBc https://youtu.be/MdaD2QIpTlQ

Finally wired up my dual relay's with flyback diodes to do the chute rotator. Took her out for a spin finally today and not that it really needed itt..but I cleaned up the spring sticks and acorns and leaves and driveway dust. Works really well!!!! When there is 4" of leaves on this yard and...

Ha. I don't think thats OSHA approved. :cool:

Here's the hitch with no attachment. And an idea of what the female part on the implement looks like. And the pulleys in this implement.

It's a front mount hitch as per the title of the post. Factory option from kubota to mount a snowblower, blade or sweeper of which I have the first two. The male hitch part itself ( Kinda like a 2 inch receiver for a truck .....the part that attaches to the truck is custom, but the 2" receiver...

I have a Stihl BR600 backpack blower. It works great. However, the yard is simply too big for it. 4 acres of wooded lawn if you let it go too long it's too much for the backpack blower. Basically have to do every other day walks during the fall, at 1.5hrs/ea. This is why I wanted a bigger...

No, but the original designers did, so if 20hp was the min required, that number should take all that into account, and was the baseline in my charts. Yes there are other variables like coefficient of efficiency of the fan etc. And numbers probably don't play out well on the far ends of the...

Heres those formulas plugged into an excel. 20 hp line is the baseline as it is known (or guestimated based on available data) HP RPM CFM 30.10 3500.00 4354.94 27.60 3400.00 4230.52 25.23 3300.00 4106.09 23.01 3200.00 3981.66 20.92 3100.00 3857.24 20.00 3054.00 3800.00 18.96 3000.00 3732.81...

I found an engineering manual that dsicusses HP RPM and CFM for sizing motors for various fans. Basically it starts out by saying "Few technicians realize the large amount of increase in HP required for even small gains in CFM or increase in RPM. " LIke I said, the relationship is cubic. The...

SO I picked up a New Holland 708D debris blower for a very fair price. It is exactly the same as the F2535D debris blower for F-Series mowers. It has the quick attach mount and was already converted to electric nozzle rotation, and I have the quick mount front hitch for my G5200 which I run a...

I have one. Actually, I put 2 together, a toasted 4200 that had full hydraulics and 3pt and pto but bad engine, and a 5200 that was a plain jane 5200. I swap the whole rear axle/hydro assembly to the 5200. Works awesome. There are a couple different aux hydraulic kits for this. There was a...

I use Mobil Delvac 1, it's a 5w40 synthetic made for diesels. (not regular Delvac, although a good oil, Delvac 1 is far superior) In the cold, they start great! Great soot control, good hot weather performance and viscosity retainment...outstanding longevity, it's a top notch oil. $29/gallon at...

I got my axle gasket and 2 seals today. Put her all back together. For some reason, it went together far easier than it came apart, probably because I wasn't freezing! When I took it apart it was -10 outside, I have a partially insulated garage with a couple spot heaters that had it up to about...

If it's just sitting and your not using or planning to use during cold, I wouldn't worry about it. It won't freeze up like water and expand and break things, just gets a little thick is all, tends to clog up on things like screens in tank pickups and fuel filters and what not. Just adding it to...

Well, I answered my own question. Yes, you can service these in the tractor. It's not pretty, but nothing real difficult about it. If you have the 3pt and rear PTO, which I do, you will have to remove it. The rear PTO drive shaft and the 3pt lower left bracket where the arm attaches is in the...

I use this stuff in my 2012 Cummins, my L35 and my G5200. WOrks great, keeps the fuel from gelling and provides some extra lube to your injection pump, with this ultra low sulfur diesel crap at the pumps now,a little extra lube is helpful. They also make a product called Diesel 911, similiar...

Has anyone got a G-Series they've replaced a rear axle seal on? I've run this little G-tractor for a couple winters now...she's been doing awesome, replaced all fluids, filters, front bearings, front axle pivot bearings, steering box when I first got it...been an awesome little tractor, I...

I don't right now, and I'm out of town this week. I can take some when I put it back together. Here's an older auction I came across and saved that shows the 3pt/w rear PTO just like mine. http://auction.repocast.com/details.cfm?ID=86827 The hitch is the same as the standard plate that comes...