Search results

  1. 007kubotaguy

    OOPS! dual clutch l2550

    When pushing the tractor back together you should not need any fasteners to do so. If everything is right they will slide together to the point of the housings touching. They don't always slide back together easily but it should not take any more and pushing the two pieces together. Sometimes...
  2. 007kubotaguy

    OOPS! dual clutch l2550

    Did you have trouble putting the tractor back together?
  3. 007kubotaguy

    Need a project...L245DT

    If anyone buys it I have parts. I have 10 l245 parts tractors. These were great machines.
  4. 007kubotaguy

    B7100 HST Restoration

    Nice job. Great before and after pictures. Nice Hood. Those hoods are getting hard to find in that good of condition. The hood itself is probably worth $500. Good looking machine.
  5. 007kubotaguy

    Kubota L345dt starting issues

    Have you ever had this engine running? Typically you would not have four bad injectors.
  6. 007kubotaguy

    dual clutch l2550

    Go to the auto parts and get a universal clutch alignment tool. It will have different size tips that fit in the pilot bearing. Then it has a tapered piece that will line up the first clutch. Rap electrical tape around the tapered piece where the second clutch disc is. Put enough on there that...
  7. 007kubotaguy

    Front Axle Bracket and Bushing Question

    I always adjust the bolt on the front of the axle pivot. It's part of a routine service. It will certainly help things not wear prematurely.
  8. 007kubotaguy

    Front Axle Bracket and Bushing Question

    You could certainly double not the studs and try to remove them. Typically they aren't very easy. You can only remove the front bracket without removing the driveline.
  9. 007kubotaguy

    Front Axle Bracket and Bushing Question

    If you'll notice on each bracket is two bolts and two studs. The driveline must be removed to drop the axle down to remove the brackets. There's no reason you can't drill and tap the original bracket. I have had better luck using a die grinder to cut the old bushing out for replacement.
  10. 007kubotaguy

    Front wheel wobbles

    I would have any of the parts you might need for your front drive. I would have the outer axle assembly rebuilt ready to ship as well.
  11. 007kubotaguy

    Front wheel wobbles

    I would remove the outer axle and inspect the bearings. You have an inboard and an outboard bearing. You also have the two half moon keepers that sit behind the large gear. Is it possible that those are not in place. This also possible that you have a bearing that is not correct. Maybe the...
  12. 007kubotaguy

    L245, no reverse, 1st, or 2nd gear

    As Wolfman said shift fork. Reverse gear has its own shift fork. First and second gear would be a separate shift fork. It would be odd that both of them are broke. My guess is something in the actual shift cover causing the problem. This is a 45 year old tractor and can have a lot of wear and...
  13. 007kubotaguy

    L245DT FEL lift ram rebuild

    I hope this helps.
  14. 007kubotaguy

    B7100 hydraulic line has a hole

    Is it the black hose or the red hose? The red hose is the suction line to the pump. The black hose is the pressure line from the pump to the valve. The suction line is generally just slipped on barbed fittings with the hose clamp. The black hose will have cramped on ends. Any good Auto Parts or...
  15. 007kubotaguy

    Seat suspension Kubota L-185

    I have the tensioning bracket. The springs it would be best to get new ones from kubota. They are still available.
  16. 007kubotaguy

    kubota L345dt hydraulic issues

    Normally your loader gets hydraulic oil before the 3-point hitch. I assume you have the aluminum hydraulic block under the seat on the left side. This should be where your oil is coming from for the loader. Then it is returned to the block to be used in the three-point. Where did you check the...
  17. 007kubotaguy

    Seat suspension Kubota L-185

    Are you looking for the original base? If so I should have a used one.
  18. 007kubotaguy

    M4030su

    I would bet the hydraulic pump lost prime. Take the suction line off the pump and pour oil into it. Most cases that'll solve the problem.
  19. 007kubotaguy

    L295DT Hydraulics not lifting front or 3 point

    My guess is that the hydraulic pump lost prime. This can happen when the pumps get weak or you have a leak on the suction side of the pump. I would suggest you remove the screen on the right side of the engine under the hydraulic pump and clean it. Then remove the pipe that is attached to the...
  20. 007kubotaguy

    Kubota B 219 front loader

    If your hydraulic reservoir is full your pump will be full as well. No bleeding necessary.