Search results

The sprayer I am using on the MX is the same one I had on the AGCO S-25. Its nothing special. For years I had a homemade forty gallon I ran on the AGCO. Then I ran across a TSC Fimco sixty gallon that had never been used for half price of a new one. Nice to have another twenty gallons of mix...

I can't speak about a tractor with a blower but I know when I had had a smaller blower on my skid loader that didn't take out the wheel tracks I had a fair amount of problems getting stuck. In my area when I really needed the blower the drifts were tall and I needed to blow my wheel tracks out...

Geohorn Thanks for the links. Its pretty green around here on this farm other than the blue planter, yellow sprayer, Grasshopper mower, S-850 skid loader and the Agco ST-25 and now the MX-6000. I looked a little at JD compacts just didn't care for them. Always had heard good things about...

So like the title says looking for the owners of the MX-6000's. Started out looking at a L2501 with loader and ended up with a MX-6000 with a loade. A mix up with two salesman kept me from buying the L2501 and the next ones I found had a very high price increase. Found this MX-6000 150 miles...

Alter Glad to here you got your tractor. I looked real hard at the L2501 because I didn't want a DPF on the farm. I was replacing a Agco ST-25 that has been a great tractor that I use a ton in the summer for spraying. Wanted a loader this time to do small loader jobs and not ruin the yard every...

I have several dump trailers that I pull with a tractor. I have never had the brakes hooked up. Slowing down has never been the problem. Dumping is the problem usually the bumper pull ones are the ones that will try to lift the tractor up when dumping. My goose neck ones have never been a...

Thanks I will try to P.M. him.

tpmx was hoping to get some information on your belt driven saw.

If you don't mind I have lots of questions on your saw build. Found your build by searching looking for ideas to belt drive a saw just like you are going to do. Is that bar a 404 or 3/4 what size shaft for the drive sprocket. Size of the drive sprocket? What rpm do you think your saw will be...