Search results

figured I would fool with it a little more before pulling the pump, when I loosend and even removed the delivery pipe-PS line, No fluid came out. With the tractor running I would have thought even a loose bolt would result in fluid spurting everywhere. I thought I would post a pic, perhaps...

may seem like a silly question but how long would a safe estimate be for an average joe to pull the unit? Looks fairly straight forward but I've been fooled by appearances before. Paul

Kubotas lookup utility http://www.kubota.com/h/PartsCat/PartsCatDetail.asp Good luck with the deck search Paul

I wonder if anyone has the mentioned service bulletin handy, there may be some info to make this easier? Paul

anyone have any tips on whether the ps needs to be bled? When I got the tractor the metal line,Kubota calls it the delivery pipe, was missing the bolt that attaches it to the pump, ordered one of those and still no PS, my thought is air in the system? Can not find a bleeder valve though or is...

RC60-72 or RC48-62 are the largest belly mowers I see listed for a b6200 Hope it helps! Paul

Thanks for the heads up, I actually have been working with the tractor all summer like this and it does get tiresome. We did replace the line that goes from the pump to the steering box, I wonder do we have to bleed it and how do you go about this? Here are a couple of pics of the tractor...

Not familiar with power beyond, how is it different from kubotas joystick setup?

need to replace one of the valve assemblies, the loader sat so long in one position, the plunger rusted where it was exposed so there is no seal once the plunger goes down that far and it leaks , still will work but you'll end up with a shoe full of hydro fluid after a little bit . just the...

Hello again everyone! A couple questions already answered, thanks! Heres the intro 1st. I came across, or lucked into more accuratly, an L2250 4WD with a BF400g FEL. The old gentleman bought it new, had some injector pump problems and parked it under some trees(Ugh!) where it sat untouched...

Mt thought was cannabalising an old bushhog, using the 3pt off of it and reversing the gearbox. or even a stranger idea, fabrcate some mounts and attach it to the boom on the FEL and use ut as a front mower? Have we hard of any of the members trying either of these ideas? Thanks

Has anyone toyed with the idea of converting a belly mower into a 3pt rear mower? I wonder how difficult this might prove I recently came across a RC60-25 for my L2250 but attaching and detaching seems to be a pain. Thanks for the thoughts guys! Paul

I recently lucked into a L2250 which had been sitting for 4-5 years. with the helpful advice from this forum we replaced the bad injector pump with a pump off an old L2050 and it's been working well. Now the question, the l2050 did not use a fuel pump so when we put on the injector pump we...

Came across a T1400 sitting in someones back yard rotting away. We cleaned out the carb and fuel line and got it running but the rc40 deck has serious rust issues so we need a new shell , the dealership seems to think they are made out of gold, does anyone know of a resource for used parts...

I have an L2250 and my neighbor has an L2950, we would both like to find the napa and fram equivilent for our air,oil and hydralic filters. Thanks

Thanks for the advise on the injector pump swap out, went great! Does anyone have a cross reference chart for an air filter for my L2250? Thanks

Although the injection pumps are different I think perhaps I can use the injection pump off the L2050 on the L2250- it appears that the L2050 has the fuel pump integrated in to the injection pump while My L2250 has separate fuel pump from the injection pump. My thought was to use the integrated...

L2250- Injection pump swap out for D1302 engine Does anyone know if the injection pump from a d1102 will work on a d1302? the asembly bolts on, the main difference I see is the fuel pump iappears to be integrated into the 1102 assembly where the d1302 has a separate fuel pump? missing the...