Search results

Well, I have the same droopy stabilizer leg on my Bh77. Valve stack was replaced under warranty. Couple weeks later stabilizer started drooping in about 10 minutes. Bad problem is that it wont support the tractor very long when digging. I have to keep adjusting that stabilizer when digging.

Here is a 2022 U-48 on Marketplace:

🙄Washed and waxed the lx2610 this evening. 👻

Did some bush hogging yesterday. All day job.

I don’t know exactly, but they’re double walled state DOT standard. 12 years ago we installed same culvert pipe, except 12” instead of 18”, in the same area. The first load of gravel was delivered in a tri-axle grossing around 68,000lbs. There were some tire tracks in the back fill, but...

I helped my cousin install a culvert and create a driveway. Gravel had to be put off till next month.

Before you disconnect the hoses, Shut off your engine. Move all of the backhoe controls, including stabilizer controls, until there is no more movement in your backhoe. This relieves the hydraulic pressure in the backhoe. Unhook backhoe hoses and reconnect to the tractor. Being stored in...

1425lbs with 12” bucket.

Well, Cat got into the class 8 trucks for a while. A very short while. Fugly tractors and they didn’t sell very well.

Kubota LA525 loader weighs 805 lbs. Per google

Quick google search “the 2021 Kubota BH77 backhoe has a net weight of 1,105 lbs”

More power!! More power!! I would get a LX3310 or LX3520.

The landPride 3rd function valve came with matching flat face couplers. When hooking those couplers back up, you never knew if the grapple would open or close like it did before.

On Saturday I had 1 more batch of brush to pick up with the grapple. The grapple opened, but would not close. So, I shoved the brush pile down to the burn pile. On inspection, I found the male hose fitting had popped out of the female fitting. Oh, good, easy fix. Nope. The o-ring in female...

I spent all day yesterday and 5 hours today clearing a customer's fence line.

TractorHouse is a good place to advertise equipment. Your first add used to be free. I’m not sure about now.

Jealousy comes in all shapes and forms. Ignore that useless rectum.

1 of the quick connects on my grapple started leaking. It would leave a small puddle over night. Removed the o-ring and the hydraulic shop matched it. That fixed the leak.

Could the o-rings in the female fittings be damaged or undersized?