Search results

Can anyone post photos of how the hoses are routed for a front snowblower set up. Dealer routed them last year when it was delivered and routed them through 2 double ring holders. The rear holder seemed to be in the wrong spot and difficult to remove hoses from, so I removed it. I just...

Just did my 50 hour service, oil and fuel, and I will do the other stuff tomorrow. Filters seem to be in stupid spots for easy access and clean up. Not trying to baby it, but what cleaner are you using to get the oil and fuel off after you do a service? Brake cleaner seems like it might be too...

In my B2650 there is a fuse block with unused fuse spots but no power to them. Power comes in via wire and then connects to the metal bar that links between each slot on that supply feed. Is there a way to connect to this bar? I know I can add an additional fuse block/power distribution point...

Anyone replaced the factory cab doors with openable glass? Just seems like Kubota could have thought this out a bit better. These really are fish bowls and get uncomfortable even in mild weather, necessitating use of the a/c to be comfortable. I have briefly looked at the possibility of...

I was greasing my snowblower and came to the front u-joint, just behind the snowblower itself, on the short/half shaft. On this shaft is a plastic cover. 1) There is a chain that is supposed to attach to the plastic to keep it from rotating. It is permanently attached to the metal of the...

Looking for attachments for my B2650 with cab. At this point I am looking at a grapple, rear blade(other post on this already) and maybe a spreader(for sand in the winter mostly) and pine needle rake. Everything attachments seems to be heavily represented on youtube and possibly the same mfr...

I thought I had a thread on this site, but I don't find it. I had a thought to add a remote start to my tractor so I can get it warming up before I go out to blow snow. Nobody around me has done it and I am scared to be the first. Any thought on the ability to do this myself? I noticed that...

New to the tractor game. In looking at rear blades, there are many mfrs of a standard 3 way back blade, but only a few mfrs of 6 way. Is the 3 way good enough? Is the 6 way overkill? Thoughts, experiences recommendations. B2650

I was adding rear work lights to my new tractor and noticed a cluster of four unused connectors just below the front wiper motor. I presume there are associated wire harnesses that would connect to them and go to their respective items. Anyone know what those might be? Maybe a beacon light...

Seems like there are 3 positions on the dome light switch, but only on and off work. The middle position, normally door activated in a vehicle, does not seem to work. Is that normal? :confused:

Did search here and on the Internet and found nothing. Manual is all but useless!!! How do I get to the bulb in the front work lights? Once in there I can determine bulb, but not sure how to get in there. Anyone? There are 2 screws on the back, but that seems odd. Maybe lens snaps in...

I did a forum search and read the posts, but not too much there so I am reasking the question. I am getting a B2650 with cab. I have watched the youtube maintenance videos and it would be nice not to have to lay on the ground to do it, especially for those of us that are in a winter climate.