Search results

Good idea on lowering onto knuckle. Just got my pliers from Northern Tools. From Channel Lock, $49. Will now tackle the left side. Yeah, Dunkin Donuts my granddaughter brought home to keep me motivated.:p

Thanks Billdog350. Yes, I had to persuade the C clip (see pix). After using brake cleaner and compressed air to clean all, used emery cloth and wire wheel to clean up seat faces. I got the external C clip in place but it wasn't completely set. I flipped assy over and tapped with a hammer...

Hey North Idaho Wolfman - ya did it! I went back and re-read and thought I had to get that 3rd C clip out, but couldn't see how that held the upper bearing and seal in. I had used a screwdriver to try and pry out the seal, then saw the claw hammer and viola!! Thanks everyone for the help. My...

Hey Billdog350, still waiting on my "heavy duty" snap ring pliers, but trudging on. Had to use a torch to heat up the housing to get the steering ball joint off to remove the knuckle. Then I realized that after removing the inner "C" clip the housing (item 16) is what came off (I was thinking...

Hey Bulldog350, 10-4 on the "good" spring clip pliers. On my 3rd set, finally got to work (haven't received the $90 set from Napa yet). I've got the snap ring 100 and 150 out. Through the "window" is the top of bearing 90 (I think). Tried prying through the hole, using an allen wrench to...

That's it stkline81, except mine is a little more intense. Was trying to order from Merrick, but having a time trying to find the part numbers.

Great stuff. Guess I know what I'm doing this weekend.

Excellent, thanks!! Have a local Kubota dealer, so will use this info to order the parts.

Yes sir, you nailed it. I can't tell exactly where the leak is. After sitting for a day, there is just a wet spot (probably 10" diameter) directly below the axle case.

I have a 1999 L3010 and have a leak apparently coming from that cylinder (not sure what it is called) at the end of the axle for the rt front tire. I'm assuming their is a gasket / seal kit. Anyone have experience with this?

I have a 1999 L3010 with about 480 hrs. Spring tune up and turning the ignition on, no response from the instrument panel. It started after about 3 seconds, still no fuel gauge, temp, glow plug, air filter, etc. Still ran OK. Turned ignition off and the engine continued to run. Had to put...