Search results

Just wanted to report that all went ok with the washing. It got dried afterwads and no extra rust so far :)

I agree, we are not talking about mechanical watch precision here. BUT, let me tell you that the guy who is selling these tillers has measured width of blades and they are spread at 135 cm, while on the tiller it writes HL 145. 145 cm is inside measure of the chassis. So, I would say working...

It will be mostly plowed land.

:)

To make things more complicated, it seems that markings of width on the rotary tiller are not unique and depend of the manufacturer. The specs for the tractor list maximum working width. And what is working width? I assume it is the span of ground that the tiller’s blades physically engage and...

Yes, I have manual transmission. And 1st slow speed is not nearly as slow or crawing as it was on my old sold B1402.

Hi, isnt this 3310?

Thanks, yeah I can adjust the rear wheel width, but at the narrowest setting it is already 130 cm. That would be sketch marked as "a": 1015 mm measured at the middle of the wheel from the image below. Add to that half of tire thickness on one side and half on another, that gives you...

Hi all, I am buying rotary tiller for my Kubota L3200. Manual states the maximum width of the rotary tiller should be 137 cm. The dealer I want get the tiller from offers widths of 125 and 145 cm, while the outer width of my wheels is 130 cm. Rotary tiller doesn`t have any side movement. I am...

OK, thanks for the warning :)

Ok, I washed it and it seems ok now. I ran tractor for an hour afterwards to warm everything up. I talked to the neighbor asking him about how to drain old coolant left inside block. He said why don`t I run tractor for a short time with radiator draining plug open. Does that sound like a good idea?

OK, thanks.

Hi, I haven`t noticed manual mentioning draining block. Is it possible and how? If not, that means that you are always left with cca 20% of old coolant in the mixture...

I guess you are saying that getting everything wet is less of a problem than having radiator covered in dried coolant? Too bad I didn`t wash it before it dried then.

I assumed the system was "dry" after draining it? How can I bleed out all the trapped air?

Hi everyone, I recently purchased a used L3200 with low hours, and since winter is here, I decided to change the coolant. I drained and cleaned the radiator and began adding fresh coolant. I have the original tractor manual, which states the radiator capacity is 6 liters. Using a funnel, I...

Well it has plugins (little sockets) on both sides so I guess it takes less force to pull it out from the sockets then to break something.

Is the brake light switch the same component as the safety switch? They look the same to me. https://www.amazon.com/dp/B0CKBYKQ4Q?ref=ppx_yo2ov_dt_b_fed_asin_title

Ha, ha - good point ;)

Thanks, will give it a try.