Search results

Get either a plastic pallet or buy a 275 gallon tote and modify it to suit. A wooden pallet will eventually become unusable. EDIT: One of these Pull the plastic liner out and modify the cage to suit.

You should see about throwing in a set of forks... They, much like the FEL, are invaluable. Congrats!

I don't know.

Just wanted to publicly thank rkidd for taking the time to send me pictures of his mmm deck connection. I think he found the issue that apparently is one of this insider things the dealers do that is not in the instructions to work around the deck linkage interfering with the tractors brake...

I also found this...

I know its water under the bridge at this point... I got quotes from 2 local dealers, one was $210 and the dealer I normally use was $220. And that included the shipping they charged me to to get the kit to them. Heres the kit from Colemans... http://www.colemanequip.com/parts/KubotaParts/B7324/

That would be very nice of you. Just the tractor mounts is all Im stumped on. Mainly the rear ones.

Something isn't right with mine. Following the instructions has the right rear mount for the deck hitting the brake linkage. I cant see, and neither can the salesman, where I'm making a mistake. The mounts are side specific as are the brackets that go on the 3 point arms. The "pin" that goes...

Williams beat Capital by $500 on the exact same package. And they had one in stock where Capital would have had to order. Service after has been top notch as well. Jeff Pullum has been out a couple times, once to drop off a can of grey paint for some scratches I found after he delivered my...

Kidd, did you mount your mower or did your dealer? Sent from a field

Thanks for the suggestion. Don't take my post as being confrontational, I just look at that mess and think about the engineers I work with that were never taught KISS. Sent from a field

I know its not adjusted properly as it does not indicate level like I am used to seeing on the older equipment we have where I work that have similar mechanical indicators. I'm used to using the top of the bucket to indicate level, which is what we have to do when the newer electrical systems...

The full kit can be had from a dealer between $198 and $220. Sent from a field

Yeah, buy once and all that.... What dealer are you working with?

To my understanding there isn't much "on paper" difference between the 2601 and the 2650. The 2650 nets you a nicer seat and a tilt wheel. Both are worth it I believe. I think the loader for the 2650 has the level indicator over the 2601 loader. Mine does anyway and it's about useless. If you...

Ive got 3 acres, no woods but I do use the tractor to collect firewood. I went with the 2650 over the L series because I wanted the Mid PTO. I didn't need the capacity the L brought to the table because my previous tractor was smaller than what I have now and I had no FEL. So I am already ahead...

The kit that I bought and put on my 2650 had everything in it, plus some extras. Part number on the kit is b7324 and fits various models. Found these on another forum....

Ive got one of these.. http://omni-mfg.com/Heavy-Duty-3-point-Draw-Bar-Trailer-Hitch-with-welded-on-38-Grabhook-P2694967.aspx

I purchased a 7x14 dump trailer specifically to double as an equipment trailer to put my 2650 into. But Im also pulling it with a 2500 Ram 6.4. Trailer empty weighs just shy of 4000 pounds so its not really 1/2 ton territory. 14' is perfect length with the loader and nothing attached to the...

SO far so good. I haven't added my lights yet but I did check output at the battery and I am getting just over 14 volts. Install is straight forward and everything lines up where it needs to be. There is some extra wire between the starter hook up and where the loom plugs into the alternator...