Search results

I think I drooled on myself again. This ones coming here to me, been eyeballing it for a while on other places. So, it didn't get far at least. :)

Check - clutch switch, clutch in while starting Put in neutral range. I don't think this model has a safety there but many kubotas do Try to start while wiggling the treadle pedal, it has a "centered" safety Make sure the PTO is off. My PTO safety switch gets dirt and sticks in it and has to be...

I have one near springfield mo. Not sure how shipping would work on that. DM me if interested comes with pins and bolts in good condition, straight edge. I run a QA bucket so this my old one.

Ebay https://www.ebay.com/itm/255884984130?hash=item3b93eeff42:g:9oAAAOSwGXBjn0M~ and a TD03 turbo. Some assembly required.

The exhaust pipe on there is huge compared to stock. The flex corrugation has no impact. It's like equivalent to putting an 8" exhaust on your turbo honda. I would have welded a proper exhaust and hard intake pipes but I don't have welding gear or skillz. This was almost completely a bolt-on kit...

Similar situation here. Looking for a backhoe. I am looking B21, B26 and L35 range. B21 and B26 appear to be very close in capability for digging with the B26 just being nicer and has more PTO and a bit more lift. L35 would be my sweet spot if I could find one that I can afford. I need to remove...

Hi Solo, Coming along nicely. I wish I saw this earlier I would have suggested kubota parts for the oil send and return. I did a turbo on my B2910 over the winter 2020-21. It's pretty similar but my V1505 is a 4 cyl. I got the turbo, intake/exhaust manifold, injector fuel tubes (needed to fit...

I was able to go look at the little B21 that's going to auction. 1360 hr. had some difficulty with getting the neutral on the hst to start it. Starts right up, runs good, everything works. Has the stop solenoid unplugged and a lawn mower pull cord rigged up to shut it off (LOL). Can't find any...

I had read that they were all the same spec 272, 302, 402. My bad...

It may not make sense for weight. I don't really think my SSQA significantly impacts loader lift, but the part does weight about 75 lb/s. I didn't modify my bucket, I bought a new lightweight bucket from EA. Using that bucket all the angles are fine and there's no binding or issues with the...

Henro, please check your DM's :)

Order the SSQA for a L2230 from kubota. It will fit your 302 https://www.orangetractortalks.com/forums/threads/la402-ssqa-conversion-and-ea-grapple.49621/

I will check out this B21 whenever they are closer to auction and do my best to check everything out. I will decide what end of the range it is and set myself a limit. I think I might be able to snag a deal but will be patient and either figure out an reasonable way to get a b21 or somekind of...

Hey all, I have some backhoe work I need to do on my property. Ranges from excavating overgrown bushes around house, to placing underground drainage from gutters, drainage around my shop and my garage, cleaning up ditches, ditching to run power out to my chicken coop, landscaping, stump removal...

So there ya go. :) This guy has your back and he has studied this.

ATV turbo kits work great but you need to do a lot of other work with the hydro pressure reliefs, manual throttle and fueling. The net result is that if you wanted that you should have gotten a gas powered atv to begin with.

Mike, Please don't do any kind of crankcase to intake feed on a diesel. Yes, it's nice for the environment to burn up your crankcase vapors. No, it's not safe on a mechanical diesel. If your engine starts to malfunction - e.g. busted or bad leaking rings and gets blowby or fails otherwise...

It is more efficient and way more powerful. The turbo increases performance when it's needed and scavenges the rest of the time making efficient. But if you are a non hp tuner gearhead type you should probably just buy your tractor and not mess with it, which is most people. That's fine for...

The ability to push would be the effect of modding the relief in the hydrostat. Your wheels would have a lot more power up to the pressure you set. I don't know of anybody that has tested the ability of the hydro or axles and gear on the 2501 or whatever little kubota to get more pressure. I...

I am at about 150 hours on the turbo on my 2910. TD025 off kubota donor probably same/similar wheels. Tractor runs better than ever and makes a lot of power.