Search results

I see a potential safety issue. Isn't the safety rope supposed to be hung around the neck?

My numbers often go higher than the meter can register. A1C often very high as well. Passing kidney stones from time to time are lotsa fun too.

Thankfully i don't have to worry about overhead doors, springs, rewinds, tensions, etc. as I have none of those things. Now if I could just locate what used to be located in the O'l noggin. I know it was there last time I dusted. Hello Charlotte!

Didn't feel the need to start a new thread. If an issue will make changes. Anyways, thought would share a local photo, as you can see, no stranger to the "Orange Life". Thats a pair of our earliest BXs sittin there. Sadly, neither no go without their horsepower hitched fur the day. Most of the...

Just rereading through the old posts, noticed don't know my own age. I made myself out to be older than I really am at 94. I've discovered I'm 92. Feeling like a spring chicken in Nov. "The More You Know".

Trimley. I'm detecting a "Swinger". Looks to be lots of Green & Yellow" in the background there. The "Orange" family may wish to advise somewhere along the way, reform, to see the "JD" error of your ways, dig an early implement grave using your own big "Toothy". RIP "JD".

That I couldn't tell ya! Just went by your original comment "I never got the thumb yet". Didn't see where it was referring to needing to be BXpanded brand. My little "OJ24" baby bucket no match for that gargantous bucket.

Looks to be a thumb there.

Could it be that the model you purchased designed to also work with their bucket quick connect system? which requires that longer pin included with your purchase.

I had looked into a new hood & side panels from several Northeast "stealers". I want to say last spring. Also looked into new plastic fenders as they're cracked everywhere. I recall at the time they quoted me $2300 for the hood & side panels, while the rear fenders $2500. I haven't given up the...

Well, being such a nice day (warm 70s), &, talk of BX & repairs, caused me to go back out, cut me a couple pc's of tin from old roofing leftovers, no real measurement to speak of. Shaped & cut the 1 pc on the underside around the metal work for the hood latch / stiffener, while the exterior just...

Your tabs look to be in fine shape. The knobs themselves are factory as well. If you look at mine (photo) in comparison the plastic tabs are no more.

I too have the plastic hood arrangement. Here's several shots of a fix for the moment, as I'd like to keep intact helping to keep heavy snows out. Others may wish to visit the hardware store pickup a small roll of metal strapping. The holes are correct size for the knobs to pass through. Myself...

Morning "Orange Family". Feeling somewhat rundown today. Anyways, a quick shot amongst golden leaves. Have a fine day!

Evening, Sherriff picked me up this morn. Dr. advised Scott, "don't irritate your arm, give it time to heal", (no sh*t Dr. Duh!) "Better yet. let someone else handle the tractor, among other mechanical chores". "Other than that Scott, for your age, relatively in good health". I guess on a good...

Good evening Orange Family. Sheriff called again moments ago indeed dropping by first thing in the morn for taxi service. Winchester Stables this morn. Had our first flurries during the night. Other areas got a dusting, some locations 2.5 inches.

Very nice shots. Location?

Sadly, I failed to include locations, both VT. L - Grafton / R - Magic Mt. Londonderry. Both locations close to one another.

Just up the rd. today. Enjoy!

Thankfully I've both Medicaid / Medicare, along with both RR retirement & VA benefits. No pvt. medical insurance. Any really costlies, out of pocket thankfully picked-up by an agency calling themselves "Valley Cares". The other hospital they send me to at times closer to home "my neck of the...