Search results

Does it look like you could have gone wider with the spacers? I'd like to try 2-1/2" spacers with the 60" MMM. It looked like it might be close.

I have Toro front deck mowers. But they don't like ditches. That's the only reason we got the MMM. In hindsight We should have got a 455 John Deere or something instead or just got a brush hog and mirrors or camera.

I have the same setup. I am wanting 2-1/2" spacers. Do you know if they will clear?

Yep. So far my experience and chats about the LX2610 indicate I should have skipped the MMM. 2 people liked the set up and the rest, not so much. I would definitely skip the MMM on the LX2610

How far lapped is the slip slide, on the drive shaft, when the deck is all the way down?

Thanks. I will check it as best I can. I hope ours is adjusted correctly now. It's been back to the dealership 3 times, just for that. The orange piece that hooks over the 3 point and connects to the deck lift linkage kept bending.

I've operated small units that were built tough.

Any new news on this? I still haven't got to use our MMM on the LX2610. Is there anything to check before we fire it up?

Thanks. I was just trying to post to ask what you used. What is TBN?

What's your max angle? Do you have a link to the tilt meter you used? Tilt meter.com I guess this posted.

Must be kind of complicated. It took the dealership since March to get it hung without bending the orange piece on the 3 point the raises the deck.

Something the dealership said and the way I read the manual, it seemed that the deck weight was supposed to be sitting on the deck wheels. It seemed the weight of the deck wasn't supposed to be hanging. I'm having some health issues, so sometimes it's hard to concentrate. When I just push...

John Deere must have done that silly thing they do and used the same model number for different equipment. My 1963 4010 is way over 26 HP. I never understood why they did that. There are at least 4 different pieces of equipment that come up if you search John Deere 400. Does Kubota have a...

Most of my Most of my Experience is with old John Deeres. Far simpler than this. Should have kept the 400 I sold last year. - for less than the cost of this mmm. The 400 was Lot's easier than this. For me anyway. Too much, hard to reach, stuff on this LX. Just pinning the deck up is a...

I was told the 3 point low setting Needs to be at 4 if the deck is not pinned up. No explanation was given. This is the most complicated belly mower I've ever seen. I would not recommend a belly mower for a LX2610.

O On related notes. I am having trouble understanding everything about using the loader with the deck on the LX2610 and mowing with the deck up. What is the loader stop pin? So far we have just been inserting 2 pins to hold the front of the deck up. Is that all we have to.do to use the...

And the older tractors lasted 50 years and are still kicking. I don't think you'll see that out of any of the new tractors

What do you use for deck coating? We have had success on other machines with various brands of slick plate/ graphite paint. That's used on grain handling equipment

Do the deck wheels need to be adjusted every time you want to mow a different height? From what I understand the deck has to be down on the deck wheels for whatever height you are mowing. On previous machines if I wanted to mow high and make a couple passes. I could just raise the deck and go...

Any idea what the correct torque is? 86 ft lbs is the torque for the blade bolts on the LX2610 60" mid mount mower What size are the blade bolt heads?