Search results

I just bought a new zero turn and I need to keep the chute in the raised position to go through some areas especially around the raised bed gardens. I had a neighbor tell me yesterday that he took the chute off of his mower and just left if off. Is there any reason that I couldn't or shouldn't...

New kubota added to the fleet. Traded in my 15 year old bad boy. The kohler engine was getting real tired zo I decided to upgrade. Did a little mowing before the rain hits and wow what a difference in power and speed. I found out real quick that I need to take it real slow between the raised...

I did the same on my rear blade, you will really like it in the winter not having to manually change the angle of the blade.

You could get in that way, but I either have someone else get in the basket while it's on the ground and then raise it or I have someone raise it while I'm in it. I don't have a self leveling loader, so the ratchet strap is very important to keep the basket from sliding on the forks. As far as...

I bought a similar unit and it works great for trimming higher branches and changing bulbs in the barn. I don't do well on ladders. One thing I added was a ratchet strap to hold it tight to the forks so it won't accidentally fall off.

Not sure what brand the transmission is on your mower, but the hydrogear on my BadBoy was leaking at the bottom joint and I just replaced the o-ring. Once I removed the bottom cover, I took the o-ring to my local hardware store and was able to find a replacement for less than $1.

When I bought my LX the dealer told me that the only thing he could think of for using both would be a MMM and a pto driven bagger.

Just hit 300 safe and mostly trouble frer hrs this morning. I have to give credit to alot of folks on this forum for that. Reading thru many posts (not all applicable at the time) I have learned much about operating and maintaining my machine. Thanks to all who post and share their experiences...

That's the great part of retirement, I keep reminding myself that I don't have to get everything done NOW.

Look at Bora wheel spacers. I used them and they bolted right onto the existing hubs with provided hardware and then the wheels bolted to them with the original hardware.

More winter storm damage cleanup.

It was around 10 hours over a couple of days. My back will only take so much. What made it easier this year is that I was strategic in how I placed the limbs on the pile. Took a little longer up front but it was worth it on the back side.

Before and after shots. The wc68 does a great job.

Collected the storm falls that I could get to, now it's time to start chipping.

I went with 2.5" bora spacers on my lx2610. Rear tires stayed just within the width of the bucket.

Let's try this again:LOL:

Cleaned up after today's storm. We got about a foot of heavy wet snow. I was pleased at how well the blower handled it. Manipulating the rear blade is a whole lot easier now that I have the rear remotes installed. Power went out early this morning and is not back yet.

I'm leaving mine on, that way I can't be blamed for the storm😊

That's ok, my wife is blaming me too!😊

We got another 8 inches before the srorm finished. Here is the second half cleanup. Finishing up my 3rd season with the blower I broke my first shear pin today.