B7200 hst d 4wd why have my voltage regulator got a spare red wire not connected to anything it has an insulated bullet connector on it and no where to connect to. I have slightly flickering charging light on low revs. With charging issues. New battery in it.
Charging
- Thread starter skipper1
- Start date
A picture would help.
I looked up the part and the only single wire appears to be a ground wire. (black)
I looked up the part and the only single wire appears to be a ground wire. (black)
On some regulators available it's black on others it's red and some have no spare wire. I don't understand View attachment 180064
[/QUOTE]. Thank u
. Thank u
[/QUOTE]
Sorry I seen attachment. Mine is different it's black plastic flattish not like the big black ones thanks
Sorry I seen attachment. Mine is different it's black plastic flattish not like the big black ones thanks
[/QUOTE]
Last edited by a moderator:
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
What you have is a Aftermarket voltage regulator, the pinouts and the wire colors are not the same as an OEM regulator.
Can't tell you what they are or should be on that regulator.
The wiring schematic will tell you what they need to be.
Can't tell you what they are or should be on that regulator.
The wiring schematic will tell you what they need to be.
whitetiger
Moderator
Staff member
Equipment
Kubota tech..BX2370, RCK60, B7100HST, RTV900 w plow, Ford 1100 FWA
Do you suppose it may have something to do with the fact you have the wrong regulator on it?
It could do. But that's the one was on it when I got tractor 3 weeks ago. Thanks