New to tractors, top link concern

[MtnViewRanch]

So you're saying the cat 2/1 bushing adapter wouldnt work?

As has already been mentioned, the cat 2 stuff is 2" wide and will need to be ground down to 1 3/4" in width.
I believe that the bushing is already 1 3/4" wide.

Please report back as to how things worked out for you.

 

[estarr92]

What about just a top link extension bracket? I feel like that may be the best route unless I’m missing something

 

[BAP]

That blower is set up kind of odd where the bottom link attachment points are so much further forward than the top link point. That’s your whole problem right there. That creates a problem for any tractor. As others have suggested, I would strongly consider bolting on an extension to that top link bracket and being able to shorten up the tractor top link.