I did not touch the fuel settings or anything else. Installed it and ran it. I did install a pyrometer yesterday and ran it briefly and EGT's completely normal for what I was doing.
Last edited:
L2501 Turbo: A Journey Defined - The tractor, The comparison, The modification, The results...
- Thread starter Rdrcr
- Start date
That's what I thought!
Fantastic!
Most of our customers can't keep themselves from messing with the fuel settings, lol.
The temptation sometimes is just too great!
I really love the fact that your are running the Turbo Kit as pure altitude compensation on the factory fuel settings!
Mike
According to google AI it should restore the 20% lost to elevation and give an additional couple HP on top of that, assuming a 4.5 psi boost. Yes all I wanted was to restore the lost power and it is VERY noticeable.That's what I thought!
Fantastic!
Most of our customers can't keep themselves from messing with the fuel settings, lol.
The temptation sometimes is just too great!
I really love the fact that your are running the Turbo Kit as pure altitude compensation on the factory fuel settings!
Mike
Excellent. That’s great to hear!
How was your smoke output before the Turbo Kit? And, how is it now, with the Turbo Kit installed for comparison?
Mike
It had a puff at start up before, and still does. I never noticed a lot of smoke before or after the turbo but the tractor hasn't seen any heavy loads yet. I'll let you know when it does. I failed to mention I have only run this tractor for 8 hours or so that's why I'm not sure about the smoke. Haven't done any real heavy stuff.
Last edited:
^^^^
Lots of our high elevation customers report lots of smoke during heavy operation prior to the Turbo Kit installation and no smoke, or very little smoke afterwards.
Mike
Lots of our high elevation customers report lots of smoke during heavy operation prior to the Turbo Kit installation and no smoke, or very little smoke afterwards.
Mike